Search results

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Flush Style Cover with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Brass

Category: Poke-Through Cover Assemblies

6in Core-unwired-flush NickelWlk 6atnk 6in Core-unwired-fl

Category: Assembled Poke-Through Units

6" Round Cover, Recessed Evolution 6AT Series,Flush,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

P-THRU ASY FLUSH 4INComplete With One-piece Finish Flange And Conduit Assembly. Conduit Assembly Consists Of One 3/4 Inch And One 1 1/4 Inch Trade Size Conduit. Finish Cover Flange Provided With One 3/4 Inch And One 1 1/4 Inch Trade Size Screw Plug Opening. Colors Available In Painted Gray

Category: Assembled Poke-Through Units

8in Core-unwired-surface GrayWlk 8atcgy 8in Core-unwired-s

Category: Poke-Through Cover Assemblies

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BS) brass.

Category: Poke-Through Cover Assemblies

6" Poke-Thru Assembly, Prewired for A/V, Duplex ReceptPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Twist, Material/Finish: Die-Cast Aluminum/Gray, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts the Extron® Electronics AAP and MAAP Series Devices, For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Floor Insert, Flange, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

8IN CORE-UNWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartments: No Device Plates are provided. For Bottom Feed Compartments: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Nickel

Category: Poke-Through Cover Assemblies

For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly provides one (1) 3/4" trade size screw plug opening and one (1) concentric 2"-1 1/4" trade size screw plug opening and is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 5FFHA 1 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Nickel

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

8" Poke-Thru Device, Recessed, Evolution Series, Nickel8" Poke-Thru Device, Recessed Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Recessed: 3-1/4", No Device: Communication, or A/V Capability, Color Nickel, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

6IN CORE-PREWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Category: Assembled Poke-Through Units

6IN FURNITURE FEED COVER ASEM-NICKL

Category: Poke-Through Cover Assemblies