Search results

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Quad Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade), (2) Openings for Pass Through Capability for 4-Pair Cat 5e or Cat 6 Cable. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Internal Bracket, Type: GFI Receptacle, Metallic, Accepts standard GFCI & Decorator style Receptacles Communication or Audio/Video Devices

Category: Recessed Floor Box Service Fittings

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

<p>Brass GFI receptacle cover plate, 4 1/4'' (108mm) for tile. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.</p>

Category: Round Recessed Box Covers

Single-service fitting includes housing, base, two mounting frames, and mounting hardware. For use on 2" (51mm) IPS or PK Preset Systems. For PK activation, use in conjunction with FloorPort Partition Feed and PK Kit. Has 1/2" and 3/4" trade size conduit knockouts on each end. 53.3 cu. in. (906cm3) capacity.

Category: Recessed Floor Box Service Fittings

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Insert in lid allows for tile cutouts to match finished floor. Finish - Nickel

Category: Square / Rectangle Recessed Box Covers

WMD 8CREST3G 3 GANG CRESTRON

Category: Poke-Through Mounting Plates

Rectangular Flange, 3-Gang, Brass

Category: Square / Rectangle Recessed Box Flanges

4-Compartment Combination Box, Metallic, Depth: 3-7/16", Length: 12-3/4", Width: 10". Includes: (2) Receptacle Brackets. For use in Concrete Floor Applications. Floor cover is not included with box and needs to be purchased separately.

Category: Recessed Compartment Boxes

5-1/2" Round Cover, Metallic, Cover Type: Single Service (3/4" Opening). Device Type: Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Conversion Kit, Includes: 825A (1/2") , 825C, 825L, 825N, For Carpet or Tile installations

Category: Round Recessed Box Covers

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Recessed Floor Box, 4-Gang, Depth: 3-1/2 Inch, 3/4 - 2 Inch Conduit Openings, Steel

Category: Recessed Compartment Boxes

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate. Other device plates sold separately. 2-Compartment Shallow Stamped Steel Recessed Box w/tunnel,1 Duplex Bracket and 1 Comm Bracket

Category: Recessed Compartment Boxes

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RFB62A), and (2) blank mounting plates. Other plates sold separately.

Category: Recessed Adjustable Floor Boxes

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

WMD XPP2G30CD-BK

Category: Assembled Poke-Through Units

Rectangular Floor Box, Adjustable, 2-Gang, Depth: 3-7/16 Inch, (1) Duplex Mounting Plate, (1) Communication Mounting Plate, Steel

Category: Recessed Adjustable Floor Boxes