Boxes - Recessed

WMD EFB6810BTBK EVO FLR BX FL

Category: Recessed Compartment Box Covers

REC CFB 8/10-G EXTEND 5.5IN D CR

Category: Recessed Compartment Boxes

TPP DUPLEX 2-20A BLACK 10FT.

Category: Assembled Poke-Through Units

Fire-Rated Poke-Through, SystemOne Recessed 6-Inch Diameter Core Hole

Category: Assembled Poke-Through Units

WMD FPLCTCBK FLOORPORT LARGE

Category: Square / Rectangle Recessed Box Covers

Round One-Piece Receptacle Cover, Diameter: 3-3/8 Inch, Brass, Carpet Cover For Flush Service Floor Box

Category: Poke-Through Cover Assemblies

In-Floor Delivery System, Floor Box, Carpet Flange, 2-Gang, Rectangular, Plastic, Gray

Category: Square / Rectangle Recessed Box Flanges

2" IPS Afterset insert - 2 3/8" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units

HBL HWDK S1AP4BL S1 ABAN PLAT

Category: Round Recessed Box Covers

GFI Cover Plate, 3-1/4 x 4-5/32 Inch, Flip Lid, Aluminum/Gray Powder-Coat

Category: Square / Rectangle Recessed Box Covers

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Duplex device plate. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Gray

Category: Square / Rectangle Recessed Box Covers

Decorator style device plate. For use with decorator style receptacles, GFCI receptacle, and decorator style audio/ video devices. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

GFI Cover Plate, 3-1/4 x 4-5/32 Inch, Flip Lid, Aluminum/Bronze Powder-Coat

Category: Square / Rectangle Recessed Box Covers

<p>For polycarbonate afterset use only. No adjusting ring required. 4"" (102mm) O.D. Four #6-32 hold-down screws provided.</p>

Category: Recessed Box Adapters

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

HUB SS309D LOCON FACE PLATE

Category: Recessed Floor Box Service Fittings

RC7 PT W/ AL FLANGE AND AL CENTER

Category: Assembled Poke-Through Units

Floor Box Assembly, Round, Type: 15 Amp Quad Receptacle, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Gray, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Polycarbonate communications or power cover plate. Includes one plug with 3/4" (19mm) opening, one plug with 1" (25mm) opening, and one plug with 2 5/8" (67mm) opening. For pass-through only. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Black

Category: Round Recessed Box Covers

Ctx 5133678 Brnz Duplex Cover bronze

Category: Round Recessed Box Covers

Round Cover/Flange, Diameter: 6.25 Inch, Type: Duplex, Flip-Lid, Brass, For Use Round PVC, Mutli-Service Boxes

Category: Round Recessed Box Covers