Floor Box - Accessories

1" (25mm) I.D. grommeted hole two sides. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

STL SFH 50 TELECOV 50TELE COV

Category: Recessed Floor Box Service Dividers

When using any of the 862 Series Floor Boxes in a concrete floor, this kit will provide a mud cap for the concrete pour, two 3/4" trade size conduit hubs, and a scrub water gasket. Not needed for wood floor installations.

Category: Recessed Floor Box Tools

STL 668S-6PAN 668S DATA PLATE

Category: Recessed Floor Box Service Fittings

Round Floor Plate Plug Insert, Metallic, 1/2" - 14" NPS Thread, Brass

Category: Recessed Floor Box Plate Plugs

Device Plate For Recessed Service Floor Box, Galvanized Steel, Blank, For Use With 667 Boxes

Category: Recessed Floor Box Service Dividers

STL 641 P TAC BGE 641P TILE A

Category: Recessed Floor Box Service Fittings

Wlk Rfb6s1 Single Receptacle

Category: Recessed Floor Box Service Fittings

Three-Gang, Clear Polycarbonate

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up to four (4) Legrand AVIP devices or Extron® Electronics MAAP style plates. Fits into any one (1) of the shaded areas shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

8 PLEX DUAL SERVICE MULTIPLEX

Category: Recessed Floor Box Service Fittings

Hubbell Wiring Device Kellems, In-Floor Delivery Systems, Fire RatedPoke Throughs, SystemOne, 8" Series, 2) 20A Receptacles, 18" Leads

Category: Recessed Floor Box Service Fittings

WMD RFB4-SS-MAAP RFB4 SHALLOW

Category: Recessed Floor Box Service Dividers

WMD CAF3-PB BLANK POWER

Category: Recessed Floor Box Service Fittings

Single receptacle faceplate. 1 9/16" diameter hole. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

RFB2 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

Provides separation of services.

Category: Recessed Floor Box Service Dividers

<p>Communication bracket with two Wiremold CM Series adapters included. Accepts Wiremold CM Series Open System communication modules and modular jacks sold separately. NOTE: For use with RFB4-CI-1 only.</p>

Category: Recessed Floor Box Service Fittings

WM EFB8M 8-GANG MODULE ASSEMB

Category: Recessed Floor Box Service Fittings

Nonmetallic ring for use with bare concrete and terrazzo floor applications.

Category: Recessed Floor Box Service Fittings

Sc 668s-bp 668s Blank Plate

Category: Recessed Floor Box Service Fittings

Four Gang Recessed Service Floor Box, 126 Cubic Inches for Device Access and 40 Cubic Inches for Device Compartments, Length 12-1/8 Inches, Width 12-1/8 Inches, Depth 3-1/2 Inches, Compartment Size Length 5-3/4 Inches, Width 2-3/4 Inches, Depth 2-1/2 Inches, 3/4 Inch and 1-1/4 Inch Knockouts, Galvanized Steel, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Plate Plugs

Steel Device Panel For 1-gfci Receptacle.

Category: Recessed Floor Box Service Dividers