Search results

Outdoor Ground Box, 2-Gang, 20 Amp Duplex Receptacles, NEMA Rating: 6P, Dimensions 14 x 8 x 7 Inch, Black

Category: Assembled Poke-Through Units

Poke-Thru Device, Recessed, Assembled Unit, Metallic, For Use In 6 Inch Diameter Opening, Recessed 3 1/4 Inch Below Floor Surface, Die-Cast Aluminum Cover Assembly, Available in the Following Powder Coated Finishes: Black, Gray, Nickel, Brass, Bronze, and Aluminum, For Carpet, Tile, Wood And Laminate Concrete Floor Coverings.

Category: Assembled Poke-Through Units

Poke-Thru Assembly, 4" Diameter, 2 Gang, Die Cast, Accommodates 3/4" Conduit

Category: Assembled Poke-Through Units

Poke-Thru Device, 8 Inch Diameter, (2) 20A Duplex Receptacles, Aluminum

Category: Assembled Poke-Through Units

6IN PREWIRED SURF STYLE ASSEMBLY SB

Category: Assembled Poke-Through Units

Poke-Thru Device Assembly, 6" Diameter, Silver Finish

Category: Assembled Poke-Through Units

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Brushed Aluminum

Category: Assembled Poke-Through Units

6 Inch Poke-thru Device, Pre-Wired A/V Surface Style Assembly , Depth 16 1/4 Inch, Includes (1) 20 Amp Duplex Receptacle, Multiple Low voltage and AV Device Plates, Black Aluminum Cover

Category: Assembled Poke-Through Units

6IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Poke-Through Cover Assemblies

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Black

Category: Poke-Through Cover Assemblies

Device Mounting Plate, Type: Blank, Metallic, Used to Blank Off Either of the Side Compartments When No Devices or Cabling Are To Be Used.

Category: Poke-Through Mounting Plates

TPP DUPLEX 2-20A BLACK 10FT.

Category: Assembled Poke-Through Units

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

RC7 PT W/ AL FLANGE AND AL CENTER

Category: Assembled Poke-Through Units

Surface Style Cover Assembly, 8 Inch Round, Evolution Series, Die Cast Aluminum With Black Powder Coat, Each Cover is Made From Die-Cast Aluminum, Equipped With a Durable Hinge That Allows 180° Rotation, Two (2) Slide Egress Doors With Lock/Auto Close Options, 8° Beveled Edge. For Use With Carpet, Tile, Wood, Polished Concrete, and Terrazzo.

Category: Poke-Through Cover Assemblies

Poke-Through Device, PreWired, 8 Inch Diameter, Includes: (2) TR 20A Duplex Receptacles, (1) 1/2 Inch Blank Gang Housing, (3) Gang pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider, Brushed Aluminum

Category: Assembled Poke-Through Units

Recessed Furniture Feed Assembly with Surface Style Cover, 6 Inch Diameter, (1) 3/4 Inch Screw Plug, (1) Concentric 1-1/4 - 2 Inch Screw Plug, Brushed Aluminum

Category: Assembled Poke-Through Units

6IN SURF STYLE HEAVY DUTY CVR ASM

Category: Poke-Through Cover Assemblies

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Two-gang device plate that will accept up to four (4) Extron Electronics AAP style plates. This device plate takes up two of the three gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

Half-gang blank housing assembly. Designed to blank off compartment when no devices are used. For use on side compartments only.

Category: Poke-Through Mounting Plates

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

WLK 175CHA-LJB 1-GANG 3/4IN C

Category: Poke-Through Mounting Plates