"wiremold"

Poke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications. Note: UL Fire Classified For Up To 2-hour Rated Floors.

Category: Assembled Poke-Through Units

Two-gang 2" trade size conduit housing assembly. Used on 8AT Series devices. Covers two (2) of the three (3) gangs in the center compartment. Only for use with 8AT Series units.

Category: Poke-Through Mounting Plates

Poke-Thru Device, Assembled, RC7 Series, Black Non-Metallic Cover, Includes 20 Amp Duplex Receptacle and (2) Cat 6 Keystone Connectors

Category: Assembled Poke-Through Units

Poke-Thru Device, Evolution Series, 4 Inch Diameter, Includes (2) 20 Amp Pre-Wired Duplex Receptacles, Die Cast Aluminum With Black Powder Coat Finish

Category: Assembled Poke-Through Units

Poke-Thru Assembly, Flush Mount, Diameter 4 Inch, (1) 1-1/2 Inch Screw Plug and (1) 3/4 Inch Screw Plug, Non-Metallic Cover, Gray

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 3-1/4 Inch, Gray Die Cast Aluminum Cover, Includes (2) Pre-Installed 20 Amp Duplex Receptacles.

Category: Assembled Poke-Through Units

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Aluminum/Gray

Category: Assembled Poke-Through Units

Single-gang device plate that will accept up to four (4) Legrand AVIP or Extron Electronics MAAP style plates. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

Poke-Thru Device, Flush, Assembled Unit, AV3 Series, Nonmetallic, Cover: Black, Flange: Painted Aluminum, Diameter: 8-1/4". Depth: 16-3/4", Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), Accepts: Up To (4) Data/AV Ports. For Use with Carpet, Wood & Tile Flooring.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black. Diameter: 7". Depth: 16-1/2". Includes: Quad Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade), (2) Openings for Pass Through Capability for 4-Pair Cat 5e or Cat 6 Cable. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Wlk Av3atcaa A/v Fl Poke-thru

Category: Assembled Poke-Through Units

WMD 8CTC2SB 8IN SURFACE STYLE

Category: Poke-Through Cover Assemblies

6IN FLUSH STYLE CVR ASSEMBLY AA

Category: Poke-Through Cover Assemblies

WMD 8CREST3G 3 GANG CRESTRON

Category: Poke-Through Mounting Plates

6IN PRWRD FLUSH BRONZE ASSEMBLY

Category: Assembled Poke-Through Units

Poke-Thru Device, Evolution Series, 4 Inch Diameter, Includes (2) 20 Amp Pre-Wired Duplex Receptacles, Die Cast Aluminum With Gray Powder Coat Finish

Category: Assembled Poke-Through Units

4 Inch Pre-Pour Poke-Thru Sleeve, Nonmetallic Sleeve Attaches to Structural Steel or Plywood Decking, Unit Includes (3) Attachment legs, (2) End Caps and (3) Thumb Screws

Category: Assembled Poke-Through Units

8in Cover Assembly Flush-brass8in Cover Assembly Flush-brass

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Quad Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade), (2) Openings for Pass Through Capability for 4-Pair Cat 5e or Cat 6 Cable. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter 6 Inch, Depth 16-1/4 Inch, Black, The unit comes with a surface style cover, and three (3) empty compartments that are recessed 4" below the floor surface level.

Category: Assembled Poke-Through Units