Poke-Through Systems

Poke-Thru Assembly, 4" Diameter, 2 Gang, Die Cast, Accommodates 3/4" Conduit

Category: Assembled Poke-Through Units

Poke-Through Flush Base Unit, 7 Inch Diameter Brass Cover, 16 Inch Length, 1/2 and 3/4 Inch Knockouts, Galvanized Steel

Category: Assembled Poke-Through Units

Fire-Rated Poke-Through, SystemOne Recessed 6-Inch Diameter Core Hole

Category: Assembled Poke-Through Units

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Black

Category: Poke-Through Cover Assemblies

Round One-Piece Receptacle Cover, Diameter: 3-3/8 Inch, Brass, Carpet Cover For Flush Service Floor Box

Category: Poke-Through Cover Assemblies

Half-gang blank housing assembly. Designed to blank off compartment when no devices are used. For use on side compartments only.

Category: Poke-Through Mounting Plates

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

Hubbell Wiring Device Kellems, Fire Rated Poke Throughs, Recessed 4"Series, Through Floor Fitting with Junction Box

Category: Assembled Poke-Through Units

Poke-Through Device, PreWired, 8 Inch Diameter, Includes: (2) TR 20A Duplex Receptacles, (1) 1/2 Inch Blank Gang Housing, (3) Gang pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider, Brushed Aluminum

Category: Assembled Poke-Through Units

6IN SURF STYLE HEAVY DUTY CVR ASM

Category: Poke-Through Cover Assemblies

TPP DUPLEX 2-20A BLACK 10FT.

Category: Assembled Poke-Through Units

6IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Poke-Through Cover Assemblies

6 Inch Poke-thru Device, Pre-Wired A/V Surface Style Assembly , Depth 16 1/4 Inch, Includes (1) 20 Amp Duplex Receptacle, Multiple Low voltage and AV Device Plates, Black Aluminum Cover

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Black Powder Coat Finish

Category: Poke-Through Cover Assemblies

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 4 Inch Diameter, Aluminum Cover With Satin Nickel Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Half-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. For use on side compartments only.

Category: Poke-Through Mounting Plates

One-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

Poke-Through Device, Floor Fitting, AV Series, Carton of 1, Universal Cover Assembly.

Category: Assembled Poke-Through Units