"MS6-LFR-1/2-D6-ERV-AS"

Locknut, Bonded With Neoprene Gasket, 1 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

20/20 Amp, 1-Pole, QT Type, Plug-On Circuit Breaker, 10 kAIC, 120/240V AC. For use as Non-CTL. For Replacement use Only.

Category: Residential Duplex Circuit Breakers

Class CC fuse blocks accommodate all 30 ampere Class CC fuses. A choice of box, screw, or pressure-plate connectors fit a wide range of stranded or solid copper wire. Insulators are glass-filled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V. Fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multi-pole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tin-plated copper alloy. 600 Volts 30 amps 2 poles Screw With Double Quick Connects connection.

Category: Class CC Fuse Blocks

15/15 Amp, 1-Pole, QT Type, Plug-On Circuit Breaker, 10 kAIC, 120/240 Volt AC, For use as Non-CTL, For Replacement use Only

Category: Residential Duplex Circuit Breakers

4 Inch Square Box With Raised Ground, Welded, 2-1/8 Inch Depth, Side Knockouts: (8) 1/2 Inch, (4) 1/2 and 3/4 Inch, Bottom Knockouts: (2) 1/2 Inch, (2) 1/2 and 3/4 Inch, 30.300 Cubic Inches, Steel

Category: 4" Square Metallic Boxes

For deep devices such as momentary contact, remote control switches, and hospital signaling system devices. Base has 1/2" trade size KOs. Larger gang boxes available by special order. Three-gang: 4 5/8" L x 6 1/2" W (117mm x 165mm). NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "vc" or the "WH" color suffix to "WHC" to denote the Canadian versions.

Category: 3-Gang Raceway Device Boxes

Anti-Short Bushing, Diameter 7/16 Inch, Non-Metallic, For Use With Cable Sizes 12/4, 10/2, 10/3, 2/1 AWG

Category: Anti-Short Bushings

Conduit Body, Type: SLB, 1/2 Inch, Cover/Gasket Included, Aluminum, For Use as Service Entrance Fitting

Category: Type SLB Aluminum Conduit Bodies

Lutron Caseta Claro Smart Accessory Switch, White, Operates (1) Smart Accessory

Category: 15 Amp Residential Grade Decorator Switches

Mersen UltraSafe modular class J fuseholders introduce a new level of safety and ease for installing or replacing class J fuses. UltraSafe fuseholders qualify as finger-safe to an IP20 grade of protection under IEC standards. The US3J accommodates 30A class J or IEC cylindrical 22x58mm fuses. The US6J accommodates 60A class J. UltraSafe fuseholders are available in compact 1, 2, or 3-pole units, with or without visual blown fuse indication. Multiple poles can be assembled in the field by ordering and installing pin-tie handles. US3J and US6J fuseholders can be mounted on 35mm DIN-rail. Body material is a tough and durable polyamide. 600 Volts 60 Amps 1 pole with indicator series.

Category: Class J Finger Safe / Dead Front Fuse Holders

Connector Block Cover for use with AS Series Blocks.

Category: Non-Insulated Connector Block Covers

Locknut, Bonded With Neoprene Gasket, 1/2 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

MAXX Enhanced ENV is an oil only sorbent that is equally as effective on land as on water. Repels water and floats indefinitely- even when saturated. 1-ply, white, economy, medium weight pads For use with oil and petroleum based fluids. MAXX means greater performance without the extra weight.

Category: Oil Only Absorbents

Class CC fuse blocks accommodate all 30 ampere Class CC fuses. A choice of box, screw, or pressure-plate connectors fit a wide range of stranded or solid copper wire. Insulators are glass-filled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V. Fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multi-pole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tin-plated copper alloy. 600 Volts 30 amps 2 poles Pressure Plate With Double Quick Connects connection.

Category: Class CC Fuse Blocks

Universal Strut Strap, Diameter: 2", Material: Steel, Finish: Electro-Galvanized, .075" Thickness, Universal Clamp for EMT, IMC & GRC.

Category: Strut Channel Universal Conduit Clamps

Lockouts with Interlocking Tabs 1-Inch Diameter, Specifically designed for locking out power sources such as disconnects, switches, and panel boxes

Category: Lockout Hasps

GFN midget indicating fuses are available in 34 ratings from 1/10A through 30A. These time-delay fuses have built-in blown fuse indicators which pop out at the end of the fuse to visually indicate when the fuse has operated. Indicators may be used to trip a switch for remote as well as visual indication. (Not for Branch Circuit Protection). 250 Volts 1 Amps GFN series.

Category: Time Delay Midget Fuses

Locknut, Bonded With Neoprene Gasket, 2-1/2 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

Aluminum Mechanical Lug, Dual Rated, Conductor Range 600-2, 3 Ports, 6 Holes, 1/2in Bolt Size, 1-3/4in Hole Spacing, Tin Plated, UL, CSA, Same as T3A2-600N

Category: 3-Conductor Aluminum Mechanical Lugs

Mersen UltraSafe modular class J fuseholders introduce a new level of safety and ease for installing or replacing class J fuses. UltraSafe fuseholders qualify as finger-safe to an IP20 grade of protection under IEC standards. The US3J accommodates 30A class J or IEC cylindrical 22x58mm fuses. The US6J accommodates 60A class J. UltraSafe fuseholders are available in compact 1, 2, or 3-pole units, with or without visual blown fuse indication. Multiple poles can be assembled in the field by ordering and installing pin-tie handles. US3J and US6J fuseholders can be mounted on 35mm DIN-rail. Body material is a tough and durable polyamide. 600 Volts 30 Amps 1 pole with indicator series.

Category: Class J Finger Safe / Dead Front Fuse Holders

Mersen UltraSafe modular fuseholders introduce a new level of safety for class CC and midget fuses up to 30 amperes. UltraSafe fuseholders qualify as "finger safe" under IEC and DIN standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). UltraSafe fuseholders are available in 1, 2, 3 or 4 poles, with or without visual blown-fuse indicators in each pole. Multiple poles can be assembled in the field by ordering and installing pin-tie handles. UltraSafe fuseholders save up to 15 percent mounting space and any combination can be snapped onto 35mm DIN rail for extra savings in panel building time. Choose class CC fuses for Type "2" no-damage protection, one of the safest protection packages in the industry. The UltraSafe body material is tough and durable polyamide, with exceptional insulating properties. 600 Volts 30 amps 1 poles no indicator .

Category: Class CC Finger Safe / Dead Front Fuse Holders

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips. 5500 Volts 25 amps CED series.

Category: E-Rated Fuses

Class CC fuse blocks accommodate all 30 ampere Class CC fuses. A choice of box, screw, or pressure-plate connectors fit a wide range of stranded or solid copper wire. Insulators are glass-filled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V. Fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multi-pole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tin-plated copper alloy. 600 Volts 30 amps 2 poles CU Box connection.

Category: Class CC Fuse Blocks

PowerMark Gold convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLM812FCUD features space for 8, 1" breakers, 125 A bus ampere rating, a copper bus, an optional door for 6-8 circuit panel, a factory installed ground bar, and a surface enclosure.

Category: 1-Phase Main Lug Copper Bus Load Centers