Search results

Draw Stud, Short, 3/8" x 3.8", For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. Use with Greenlee Punch Drivers: LS50L - Battery-Powered Driver OR Hydraulic Drivers: 10383 - QUICK DRAW®

Category: Draw Studs

Handle for 1/2" and 3/4" Hand Benders.

Category: Hand Benders

Combo Drill/Tap Bit, Size: 10-32NC, Hex Shank Size: 1/4", Material Thickness: 1/2

Category: Combination Drill / Tap Bits

Hole Saw, Bi-Metal, Diameter: 2-1/4" Arbor not included

Category: Bi-Metal Hole Saws

175" Pulling Eye Repair Kit, Includes: (1) Pulling Eye and Adhesive, Compatible With: Greenlee 540 Series Fish Tape

Category: Fish Tape Repair Kits

ESMÖ Series Digital Multimeters. True RMS for no-compromise accuracy. Measures voltage, current,resistance, capacitance and frequency. Tests continuity and diodes. Backlit LCD with dual 10,000 count displays. BeepJackÖ warns when test leads are incorrectly inserted in current measurement terminals. Automatic and manual range selection. Relative offset mode to see changes in measurements. Data hold. Crest capture (peak hold) plus recording of max, min, max-min and average. Two voltage detection modes, non-contact or using a single test lead. One temperature measurement using a type K thermocouple. Conductance measurement. Use optional USB interface DMSC-9U for direct-To-PC logging. Lifetime limited warranty. Accessories included: (1)9V battery, test leads, protective boot, carrying case.

Category: Multimeters

Clamp Meter, Maximum Rating: 600V AC/DC , Jaw Opening: 1.18" , Features: True-RMS, Current, Phase Sequence Test, Motor Rotation Test, Peak RMS, Temperature (Type K), Resistance, Relative Offset Mode (?), VFD ACV Hz Measurement, Frequency, Capacitance, Continuity / Diode Tests & Automatic Power Off (APO) Includes: (2) 1.5V AAA batteries, test leads and clips, carrying case. CAT IV 300V. CAT III 600V.

Category: AC / DC Clamp Meters

Multimeter, Digital, Maximum Rating: 8A AC/DC & 1000V AC/DC, Features: AC/DC Amperage, AC/DC Voltage, Capacitance, Frequency, Temperature, Non-Contact Voltage Detection & Optional USB Interface, Includes: (2) AA Batteries, Test Leads & Protective Boot

Category: Multimeters

Replacement Draw Stud For Manual Drivers, Length: 5-1/2" Diameter: 3/4"

Category: Draw Studs

1/2" Spade Bit, Length: 6".

Category: Spade Bits

Spade Bit, 3/8 x 6-1/4 inch

Category: Spade Bits

High Pressure Hose Unit, 3 Feet X 1/4 Inch, with (1) 1/4" Male Coupler and (1) 1/4" NPT Swivel Threaded Fitting

Category: Corded Hydraulic Hoses

Hole Saw, Bi-Metal, Diameter: 1-5/8". Arbor Not Included.

Category: Bi-Metal Hole Saws

Blade Replacement Kit, Compatible With: PVC Cutter 864/04253, Capacity: Up To 1-1/4"

Category: PVC Cutters

600 Copper 12T U-Style Die Color: Green

Category: Wire Crimping Dies, Adapters, & Blades

GRE EK425LXK11 CRIMPER 6T LI

Category: Cordless Crimpers

750 Copper 12T U-Style Die Color: Black

Category: Wire Crimping Dies, Adapters, & Blades

Utility Cabinet, 2 Door, HxWxD: 56" x 60" x 30", Weight: 212 lbs.

Category: Mobile Utility Cabinets

1" Conduit Size Slug-Buster® Knockout Punch

Category: Knockout Punches

Gre 0151-09d Pliers Side Cutt

Category: Side Cutting Pliers

65' Fish Tape with 8-1/2" Winder Case. Diameter: 1/8", Thickness: .060", Capacity: 1/8" and 1/4", Maximum Design Strength: 400lbs, Weight: 2 lbs, Material: Steel

Category: Steel Fish Tape

3/4" Conduit Size Slug-Buster® Knockout Punch

Category: Knockout Punches

Film Cutter, Recessed Blade, Tape Splitter, Molded Plastic, Hook Hole

Category: Utility Knives

Reel Roller Kit-6'

Category: Wire Reel Stands