Search results

Crimp Die for CT-720, #8 – #2 AWG vinyl insulated Pan-Term® terminals.

Category: Wire Crimping Dies, Adapters, & Blades

Plier nose wire stripper.

Category: Wire Strippers

Thermal Transfer Label, 1.50" x 0.50", Polyester, White

Category: Permanent Labels

Ribbon for use with the TDP43MY thermal transfer desktop printer, 4" wide, resin thermal transfer, white, 12 standard ctn. quantity.

Category: Label Printer Ribbons

Vinyl Adhesive Sign, 5"x3.5"H, 'Caution

Category: Panel Labels

Electronic Label Maker, Includes LS8EQ Hand-Held Printer With QWERTY Keypad, One Cassette Of S100X150VAC Self-Laminating Labels, Six AA Alkaline Batteries, LS8-CASE, LS8-PCKIT, LS8-IB, LS8-WS, Quick Reference Card, And Operator's Manual

Category: Portable Label Printers

The PanTher LS8E Hand-Held Thermal Transfer Printer Kit Contains The Hand-Held Printer, One Cassette Of S100X150VAC Self-Laminating Labels, Six AA Alkaline Batteries, The LS8-CASE Rigid Carrying Case, The LS8-PCKIT USB Cable And PC Interface Software, The LS8-IB Protective Impact Bumper, The LS8-WS Wrist Strap, A Quick Reference Card, And An Operator's Manual

Category: Portable Label Printers

The PanTher Hand-Held Thermal Transfer Printer with QWERTY keypad prints on continuous tapes, continuous heat-shrink tubing, die-cut heat-shrink tubing, general component labels, network component labels, self-laminating wire/cable labels, and nonlaminate

Category: Portable Label Printers

Vinyl Adhesive Sign, 2.25"x4.50", 'Danger Starts ...', 2/card, 5 cards/pk, RB/WH

Category: Danger Signs

V notch wire stripper.

Category: Wire Strippers

Controlled cycle tool kit with three dies. Controlled cycle mechanism factory installed on crimping tool.Includes: • Three dies (CD-720-1 through CD-720-3) for installing #8 AWG – 250 kcmil copper compression connectors• Carrying/storage case (C-720)

Category: Wire Crimping Tools

120 VAC Adapter with Type A Plug

Category: Datacom Crimp Tools

Polyester adhesive sign, 10.0" H x 14.0" W, notice header, 'Area in front of this electrical panel must be kept clear for 36 inches osha - nec regulations' (legend), polyester adhesive, black/yellow, 1 sign/card, 1 card/package.

Category: Panel Labels

Flexible terminal block markers on continuous rolls, 5 mm x 8 mm, white

Category: Terminal Block Markers

Shrink tube reflector for tubing up to 1 1/2" inside diameter, directs heat around tubing to reduce shrink time.

Category: Corded Heat Guns

VeriSafe Absence of Voltage Tester retrofit kit. Includes AVT device with 10ft. sensor leads, 2ft. and 8ft. system cable, Split Bolt Connection Kit 8-4AWG power connectors, (12) cable ties, (6) cable ties mounts, (1) wire marker.

Category: Absence of Voltage Testers

Shrink tube reflector for tubing up to 3/4" inside diameter, directs heat around tubing to reduce shrink time.

Category: Corded Heat Guns

Vinyl adhesive sign, 2.25" H x 4.5" W, caution header, 'Machine lockout point' (legend) with down arrow, vinyl adhesive, black/yellow, 2 sign/card, 5 cards/package.

Category: Lockout Signs

Thermal Transfer Label, 2.00" x 1.00", Polyester, White

Category: Permanent Labels

Marker tag, 304 Stainless Steel, circular, 2.13".

Category: Tags

Polyester adhesive sign, 7.0" H x 10.0" W, danger header, '13,200 Volts' (legend), polyester adhesive, red and black/white, 1 sign/card, 1 card/package.

Category: Voltage Markers

Crimp Die for CT-720, #8 - #2 AWG Copper, #6 AWG Aluminum.

Category: Wire Crimping Dies, Adapters, & Blades

Polyester adhesive sign, 7.0" H x 10.0" W, danger header, 'High voltage' (legend) with hand symbol, polyester adhesive, red and black/white, 1 sign/card, 1 card/package.

Category: High Voltage Signs

4" X 4" label for compliance with NEC 210.5, Phase Conductor Label.

Category: Voltage Markers