Safety, Tools, & Testing

Cable Pulling Lubricant, Aqua-Gel II, Blue, 1-Quart Squeeze Bottle

Category: Polymer-Based Pulling Lubricant

6 Piece Drill/Tap Kit, Sizes: 6-32 - 1/4-20, Hex Shank Size: 1/4", Material Thickness: 10 GA

Category: Combination Drill / Tap Bit Kits

D Alkaline Batteries, 1.5V, 12-Count Display Pack, Holds Power for Up To 10 Years in Storage, Priced per Individual Battery, Order in Multiples of 12

Category: Non-Rechargeable D Batteries

Wire Stripper/Cutter, Capacity: 10-18 AWG Solid

Category: Wire Strippers

Pilot Bit, Length: 3-1/2", Diameter: 1/4".

Category: Hole Saw Pilot Bits

Ratcheting Cable Cutter, Capacity: Copper (Up to 400 MCM), Aluminum/Multi-Conductor Cables (Up to 600 MCM), 10 Inch Length

Category: Cable Cutters

Folding Utility Knife With Driver Blade Locks Open At 135-Degree Or 180-Degree Angles For Versatile Cutting Options, Includes Removable 1/4-Inch Impact Rated Nut Driver And #2 Phillips Bit, Intuitive Side-Button Release For Quick And Easy Opening, Effortlessly Fits Into Tool Pouches And Pockets, Enhanced By A Pocket-Friendly Belt Clip, Designed For Ergonomic And Comfortable Use During Tasks, Triple Ground Blades Make Cutting Tasks Quick And Easy, Features A Practical Tether Hole At The Back Of The Handle

Category: Utility Knives

Connector Crimping/Fish Tape Pulling/Side Cutting Pliers, High Leverage, Nose Type: New England, Overall Length: 9-1/2", Jaw Length: 1-19/32"

Category: Crimping Pliers

Pro Folding Hex Key Set, 11 Fractional Inch-Sized Keys 70550 Pro Folding Hex Key Set With 11 Extended-Reach Blades Key Sizes: 1/2, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, And 3/32-Inch

Category: Hex Key Sets

Conduit-Fitting and Reaming Screwdriver, Shank Length: 2-1/2", Overall Length: 7-1/2", Conduit Capacity: 1/2", 3/4", 1"

Category: Conduit Deburring Tools

Non-Metallic Cable Stripper/Cutter, Length: 7-7/10", Capacity: 12 & 14 AWG Solid, 12/2, 14/2 NM Cable, 6-32, 8-32 Screws

Category: NMB Cable Strippers / Cutters

Impact Bit Set Includes (2) #2 Phillips, #2 Square, (2) Combination Bits, (4) Torx Bits, (12) Hex Bits, Impact Bit Holder Plus A Ratcheting T-Handle Housed In A Modbox™ Case, Ratcheting On/Off Switch Can Lock In The Static Position For High Torque On Interchangeable Extended Length Bits, Powerful Magnet Inside Barrel To Better Retain Bits, As Well As Pick-Up And Hold Fasteners, Proflex Impact-Rated Bits With Impact-Absorbing Torsion Zone To Extend Life Of The Bits, Smooth Ratcheting Function Creates Low Backdrag For Optimal Ratcheting Performance, Compact, Modular Storage System Is Designed To Nest Neatly Within The Modbox™ And Is Stackable With Cases Of Similar Design, Clear Lid For Quick Tool Identification, T-Handle Carefully Designed To Bury The Ratcheting Mechanism In The Palm For Maximum Grip Comfort Between The Fingers And In The Palm

Category: T-Handle Hex Key Sets

Replacement Blades for Cable Skinning Folding Utility Knife, Material, 440A Stainless Steel, Blade Length: 2-1/2"

Category: Folding & Lockback Knives

Wire Pulling Lubricant, Clearglide, Temperature Rating: 30 To 180 Deg F, Includes: (1) 5 Gallon Bucket.

Category: Polymer-Based Pulling Lubricant

M18™ Redlithium, 18V, Battery, Xc High Capacity, Lithium, Average Capacity: 5 Ah, Weight: 1.6 Lbs Includes (2) Batteries

Category: 18 Volt Cordless Tool Batteries & Chargers

6.25" Level, Magnetic, V-Grooved Edge, Vials: (4), Material: Aluminum

Category: Torpedo Levels

Cable Skinning Utility Knife, Replaceable Blade, Material: 440A Stainless steel, Blade Length: 2-1/2", Blade Thickness 15/64", Hangle Length: 4-3/4"

Category: Folding & Lockback Knives

Wire Pulling Lubricant, Yellow 77, Wax-Based, Includes: (1) 1-Quart Squeeze Bucket

Category: Wax-Based Pulling Lubricant

TKO Hole Saw, Carbide Tipped, Diameter: 1-1/8".

Category: Carbide Tipped Hole Saws

Advanced Circuit Tracer Kit, 200+ Feet for Tracing, Includes: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case

Category: Circuit Tracers

4 Piece, Carbide Hole Saw Kit, Sizes: 7/8" (22 mm), 1-1/8" & 1-3/8.

Category: Carbide Tipped Hole Saws

Crimping/Cutting Tool, Capacity: 10-22 AWG, Overall Length: 9-3/4", Application:/Insulated Connectors

Category: Wire Crimping / Cutting Tools

TPI 12/14 Pack Qty 3 Size 44 7/8" Length 14.285 More Cuts. Less Blade Changes., 3X Life in Stainless Steel and other extreme metals., Fastest cutting blade in thick, hard metals.

Category: Bandsaw Blades

Rust-Oleum® 203027 M1600 Precision Line Solvent Based Inverted Marking Paint, 17 oz, Liquid, Fluorescent Orange, 600 to 700 Linear ft/gal with 1 in W Stripe

Category: Upside Down Marking Paint