Tripp Lite IS-250 250 WATTS FULL

  • Mfr/Brand Name:

    Tripp Lite
  • Mfr Number:

    IS-250
  • Rexel Part Number:

    557656
  • UPC:

    037332070043

TPL IS-250 250 WATTS FULL ISOLATION. TRANSFORMER WITH FARADAY SHIELD, 2 OUTLETS.

$ 135.49 / EA
EA = EACH

    Currently unavailable for online purchase.

Qty EA

Multiple 1

Mfr / Brand Tripp Lite

Mfr Part # IS-250

Rexel Part # 557656

UPC 037332070043

UNSPSC 43220000

View similar products in this category:

Tripp Lite IS-250 250 WATTS FULL is rated 3.7 out of 5 by 3.
Rated 1 out of 5 by from Not for cleaning up generator output I have a standby natural gas fired generator in my home that runs when utility power is down. It runs a 20 minute test every week. During those 20 minutes, the UPSs (uninterruptible power supplies) on our computers keep switching back and forth to battery power, even though the frequency and voltage from the generator are correct. I thought an isolation transformer would clean up the output of the generator so that the UPSs would not switch to battery power. Wrong. An isolation transformer can eliminate spikes and high frequency distortion components, but (because the magnetic properties of iron are nonlinear) it generates distortion itself. The UPSs work better without the isolation transformer.
Date published: 2013-09-05
Rated 5 out of 5 by from Noticeably reduced the level of floor noise in my studio monitors Power in a home studio can be a nightmare. You have pipes in the walls, cable wires, and usually at least a little, if not a lot, of "dirty" power. I've been using Furman power conditioners and was getting irritated by the white noise I was getting, so I decided I'd try something else out. I just purchased the IS250 and as soon as I plugged my JBL LSR4326P monitors into it, I could hear a noticeable difference in the "floor noise". I definitely recommend this product to anyone wanting to clean up their power. I think it's a must when it comes to audio.
Date published: 2013-06-06
Rated 5 out of 5 by from Does the job. I had a hum in my new sub-woofer. After much searching, I narrowed my problem down to a house electrical issue. All circuits had the same problem. Once plugged in, no more hum. There are two outlets on this item, so when I add another sub-woofer, I'll use the currently open outlet. This is a well built unit that has worked flawlessly.
Date published: 2012-06-13
  • y_2016, m_12, d_9, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_557656, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rexel

Place your Will Call order by clicking the cart button next to the appropriate Branch