Search results

Wall-Mount Enclosure, NEMA 4, Hinge Cover With Quarter Latch, 20 x 20 x 8 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Lock inserts, description: Lock inserts for installation in comfort handle, mini-comfort handle, Ergoform-S standard, folding lever handle.

Category: Enclosure Handle Kits

Enclosure, NEMA 4/IP66, Hinge Cover, 12 x 12 x 6 Inch, Steel/Gray Powder Coat

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Comfort Handle, TS Series, For Use With Lock Number 12321, Includes (2) Keys

Category: Enclosure Handle Kits

TS Sidewalls, 78.700 x 31.500 Inch, Carbon Steel, Includes Hardware, For Use With TS/TS IT Enclosures, Packaged as 2 Pieces

Category: Rack End Panels

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 30(H) x 24(W) x 12(D) Inch, Carbon Steel, Includes Steel Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 24(H) x 20(W) x 9.8(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

RTT 8612160 TS SYSTEM CHASSIS FOR

Category: Rack Mounting Kits & Hardware

Metal multi-tooth screws, Metal multi-tooth screws, description: For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Packaging Unit: 300 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Baying connector, external, for TS/TS, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For mounting on the vertical enclosure sections from the outside. Packaging Unit: 6 pc(s).

Category: Rack Mounting Kits & Hardware

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 41(H) x 35(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Cable shunting ring, material: Steel, surface: Zinc-plated, supply includes: Assembly parts, description: For flexible, system-compatible cable routing at the side of the 482.6 mm mounting frame or on 482.6 mm mounting angles. Packaging Unit: 10 pc(s).

Category: Rack Cable Management Devices

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 35(H) x 30(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall-mounted cooling units TopTherm "Blue e", Total cooling output 1.00 - 1.50 kW, total cooling output L35L35 at 50Hz: 5459, material: Sheet steel, color: RAL 7035, supply includes: Nano-coated condenser, Integral electric condensate evaporation, Fully wired ready for connection (plug-in terminal strip), Drilling template, Assembly parts, description: Energy-efficient Blue e wall-mounted cooling units in output categories from 1,000 W to 1,500 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporation as standard.

Category: Enclosure Compact Cooling Fans

Assembly screws, Phillips-head screw, supply includes: Plastic washers, description: For electronic equipment, 482.6 mm installed components and blanking plates. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages