Search results

Enclosure, NEMA 4/IP66, Hinge Cover, 12 x 12 x 6 Inch, Steel/Gray Powder Coat

Category: NEMA 4 Wall Mount Enclosures

Lock inserts, description: Lock inserts for installation in comfort handle, mini-comfort handle, Ergoform-S standard, folding lever handle.

Category: Enclosure Handle Kits

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Wall-Mount Enclosure, NEMA 4, Hinge Cover With Quarter Latch, 20 x 20 x 8 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 24(H) x 20(W) x 9.8(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 30(H) x 24(W) x 12(D) Inch, Carbon Steel, Includes Steel Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Metal multi-tooth screws, Metal multi-tooth screws, description: For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Packaging Unit: 300 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Wall Mount Enclosure, Hinge Cover With 3-Point Latch, NEMA 4, 41(H) x 35(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 35(H) x 30(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Wall-mounted cooling units TopTherm "Blue e", Total cooling output 1.00 - 1.50 kW, total cooling output L35L35 at 50Hz: 5459, material: Sheet steel, color: RAL 7035, supply includes: Nano-coated condenser, Integral electric condensate evaporation, Fully wired ready for connection (plug-in terminal strip), Drilling template, Assembly parts, description: Energy-efficient Blue e wall-mounted cooling units in output categories from 1,000 W to 1,500 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporation as standard.

Category: Enclosure Compact Cooling Fans

Assembly screws, Phillips-head screw, supply includes: Plastic washers, description: For electronic equipment, 482.6 mm installed components and blanking plates. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Comfort Handle, TS Series, For Use With Lock Number 12321, Includes (2) Keys

Category: Enclosure Handle Kits

Enclosure Keys, 3524 E Series, For Use With Lock Inserts

Category: Enclosure Key Inserts

Mounting angles, 482.6 mm (19Zoll), for TS, L-shaped mounting angle, material: Sheet steel, 2 mm, supply includes: Assembly parts, description: L-shaped mounting angles, also for accommodating server system installation kits. Packaging Unit: 2 pc(s).

Category: Enclosure Mounting Bracket Kits

Base/plinth components, front and rear, 200 mm, Sheet steel, for TS, TS IT, SE, CM, TP, PC, IW, Solid, material: Base/plinth components: Sheet steel, Cover caps: Plastic, surface: Spray-finished, color: RAL 7022, Cover caps: RAL 9005, supply includes: 2 base/plinth components, 4 cover caps, Assembly parts, description: Base/plinth component consisting of one trim panel and two pre-configured corner pieces. In 200 mm high base/plinth components, one trim panel is divided into two for cable entry. Packaging Unit: 2 pc(s).

Category: Enclosure Housing Bases

Component shelf 2 U, static installation, 482.6 mm (19Zoll) for 482.6 mm system punchings, 482.6 mm, material: Sheet steel, surface: Spray-finished, color: RAL 7035, description: Component shelf 2 U, static installation for attachment to the 482.6 mm system punchings. Load capacity: 25 kg.

Category: Enclosure Shelves