Search results

LED Driver: Input Voltage 100-277VAC, Output Voltage 24VDC, Wattage: 3W Min - 30W Max, Class 2 Dimmable Low-Profile Constant Voltage Driver. Dimmable with standard TRIAC, MLV, and ELV dimmers. Forward phase and reverse phase compatible. Suitable for LED lighting. Class 2; Class P; Type HL; FCC Compliant; cULus Listed; Damp location.

Category: LED Driver Power Supplies

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 350-450 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-40W, 2-4 ft T8, T10, T12 or 4-Pin Long Compact

Category: Emergency Fluorescent Ballasts

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Rapid Start, Centium Series. For use with the following Linear Lamp Types: (1 or 2) F30T12, F34T12/F40T12 or FB34T12/FB40T12.

Category: T12 Electronic Fluorescent Ballasts

Sylvania F30T8/CW/23116 Fluorescent Lamp, 30 W, Bi-Pin Medium Fluorescent Lamp, T8, 2180 Lumens *Sylvania Part # 23116* *** Not for Sale in Vermont due to State Regulations ***

Category: T8 Preheat Fluorescent Lamps

Fluorescent Lamp, Rapid Start, T12, 30 Watt, 4200K, Base: Medium Bipin, 60 CRI, Lumens: 2200, Length: 36 inch, Standard Case Qty: 30 *Sylvania Part # 23476* *** Not for Sale in Vermont due to State Regulations ***

Category: T12 Rapid Start Fluorescent Lamps

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Optanium Series. For use with the following Linear Lamp Types: (1 or 2) F32T8, (1 or 2) F32T8/ES (25W, 28W, 30W) or (1) F40T8.

Category: T8 Electronic Fluorescent Ballasts

LED Lamp for HID Retrofit in Shoebox/Wallpack: Switch between 3000K, 4000K,& 5000K Color Temperature right on the unit; 30W, Lumens: 3500/4200/4300 (Per Color Temp.), 120-277V, Base: Medium Screw (E26), CRI: 92, Rated Average Life: Up to 50,000 Hrs. Replaces 100w HID Lamps. *** Type V Distribution *** NOTE: When installing LED-8000 Series Retrofit Lamps Within HID Fixtures, Ballast Must be Bypassed When Present.

Category: Post Top / Site / Wall Pack LED Lamps

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Centium Series. For use with the following Linear Lamp Types: (1) F17T8, (1) F25T8, (1) F32T8 or (1) F32T8/ES (30W).

Category: T8 Electronic Fluorescent Ballasts

30 Watt LED HID Replacement; 5000K; Medium Base; Adjustable Beam Angle; Type B Ballast Bypass;100-277 Volt

Category: Post Top / Site / Wall Pack LED Lamps

Fluorescent, Rapid Start Lamp, 30W, Bulb: T12 (Tubular), Base: Medium Bi-Pin (G13), Lumens: 2250, CRI: 59, Color Temp: 4100K. Rated Average Life: 18,000 Hrs. Length: 36 in. *Philips Part # 27242-7* *** Not for Sale in Vermont due to State Regulations ***

Category: T12 Rapid Start Fluorescent Lamps

Dimmable 30W ELV Driver: Input Voltage: 100-130V AC, Output Voltage: 24V DC / 3-30W (non-dimming) 18-30W (dimming applications), Forward phase / Reverse phase / ELV / TRIAC, cETLus Listed (dry locations). Dimensions: 7-1/16"L x 2-3/8"W x 1-3/8"H.

Category: LED Driver Power Supplies

LED Filament Lamp: Type-B (Ballast Bypass), ED28 Shape; 30 Watt, 6000 Lumens (Up to 150W Equiv.), 5000K Color Temp., 80CRI, E39 (Mogul) Base, 120-277 Volt. Enclosed Fixture & Wet Location Rated. Minimum Start Temp.: -30ºC (-22ºF): Maximum Starting Temp.: 40ºC (104ºF).

Category: LED Retrofit For HID Lamps

8' LED T8 Lamp, 30W, 120V, Base: FA8, Lumens: 4200, CRI: 80, Color Temperature: 5000K, Non-Dimming, Rated Life: 50,000 Hrs. CorePro LEDtube InstantFit T8. p/n: 533034, 12NC: 929001897404 ***Warning: Philips LED T8 InstantFit Lamps Will Only Operate Properly On Compatible Electronic Ballasts***

Category: T8 Tubular LED Lamps

Electronic Ballast, Fluorescent, Input Voltage: 120-277V, Instant Start, Optanium Series. For use with the following Linear Lamp Types: (1) F17T8, (1) F25T8, (1) F32T8 or (1) F32T8/ES (25W, 28W, 30W).

Category: T8 Electronic Fluorescent Ballasts

Plug-in Driver, 30 Watt, 12 Volt

Category: LED Driver Power Supplies

LED Driver 100-277VAC; 12VDC; 3W Min - 30W Max, Class 2 Dimmable; Low-Profile Constant Voltage Driver. Dimmable with standard TRIAC, MLV, and ELV dimmers. Forward phase and reverse phase compatible. Suitable for LED lighting. Class 2; Class P; Type HL; FCC Compliant; cULus Listed; Damp location.

Category: LED Driver Power Supplies