Search results

General Purpose LED Floodlight, 160 Watt, 120-277V, 82 CRI, 21000 Lumens, Color Temperature: 5000K, Trunnion With Tilt Angle In 30-¦ Increments, Bronze Finish

Category: Outdoor LED Flood Lighting

Electronic Emergency Ballast with Backup Battery: Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with multiple fluorescent lamps and Philips LED T5 (HE/HO), LED T8 (2', 3', 4' & U-Shape) & LED "CFL" lamps.

Category: Emergency Fluorescent Ballasts

General Purpose LED Floodlight, 160 Watt, 120-277V, 82 CRI, 20945 Lumens, Color Temperature: 5000K, Slipfitter Mount With Tilt Angle In 10-¦ Increments, Bronze Finish

Category: Outdoor LED Flood Lighting

Power Supply, 2.3 Amp, 160 Watt, Switcher, 480 - 600 Volt AC Input, 24 Volt DC Output, 3-Phase,

Category: Intelligent Relay Power Supplies

LED High Bay, 160 Watts, 120-277V, CRI: 80, Color Temperature: 5000K, Lumens: 19,263, Dimmable

Category: LED - High Bays

Magnetic Ballast, Fluorescent, Input Voltage: 120V, Rapid Start, Magnetic STD Series. For use with the following Linear Lamp Types: (2) F72T10/VHO, (2) F72T12/VHO, F96PG17/VHO, F96PG17/VHO/ES, F96T10/VHO, F96T12/VHO or F96T12/VHO/ES.

Category: Very High Output Magnetic Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger; 17-250W, Input Voltage: 120/277V;90 Minute Illumination Time;24 Hr Recharge. Lumens: 300-750;Hazardous Location

Category: Emergency Fluorescent Ballasts

LED High Bay, 2 Foot, 160 Watt, 21000 Lumen, 4000K, 85 CRI, 120-277 Volt, Replaces 8-Lamp T8, 6-Lamp T5HO, or 400W MH

Category: LED - High Bays

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277 Volt, 1000-3500 Lumens Initial Light Output W/ One Or Two T8 T9 T10 Or T12 Lamps Spec Grade, 17-215 Watt

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery, Charger and Redi-Test (Auto-Code Compliance Testing), Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 1100-1400 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-215W, 2-8 ft or (2) 17-40W 2-4 ft T8, T9, T10 or T12 lamps or (1) 18-55W or (2) 18-39W, 4-Pin Long Compact.

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120-277 Volt, Up to 1400 Lumens Initial Light Output

Category: Emergency Fluorescent Ballasts

POWERFLEX 753 AC PACKAGED DRIVE

Category: 600 Volt AC Operated General Purpose Variable Frequency Drives

LED High Bay, 2 Foot, 160 Watt, 21000 Lumen, 5000K, 85 CRI, 120-277 Volt, with Passive Infrared Occupancy Sensor, 8' Cord, Straight Blade Plug 277V, NEMA 7-15P, Replaces 8-Lamp T8, 6-Lamp T5HO, or 400W MH

Category: LED - High Bays

LED High Bay, 2 Foot, 160 Watt, 21000 Lumen, 5000K, 83 CRI, 120-277 Volt, Replaces 8-Lamp T8, 6-Lamp T5HO, or 400W MH

Category: LED - High Bays

The REDiTEST B30ST emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one red case. The B30ST can be used with most 17 - 215 W (2’ - 8’) T5, T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving, and (4-pin) twin, quad and triple twin-tube compacts. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts.

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 1100-1400 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17 - 215 W (2’ - 8’) T8, T9, T10 or T12 fluorescent lamps and (4-pin) long compacts. One- or two-lamp operation may be selected

Category: Emergency Fluorescent Ballasts