"terminal blocks"

RC55, Horizontal Mount, (10) Marking Cards, Legend: 11 - 20. For use with 5 mm Terminal Blocks.

Category: Terminal Block Horizontal Marking Cards

SLC TERMINAL BLOCKAB 1746-RT30 SLC TERMINAL BLOCK

Fuse, 2 Amp, Class CC, Time-Delay, Rejection, 13/32 Inch x 1-1/2 Inch, 600 Volt, Ferrule Terminal, Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity, CC-TRON

Category: Class CC Fuses

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 2/0 AWG, 3/8 Inch Bolt Hole, 1 Inch Hole Spacing, Coded Black, With Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Long Barrel Copper Compression Lugs

Terminal Block, Cross Connectors, Jumpers, 2-Pole, 32 Amp, Yellow

Category: Terminal Block Jumper Bars

Terminal Block, Cross Connectors, Jumpers, 3-Pole, 32 Amp, Yellow

Category: Terminal Block Jumper Bars

Contactor, 23 Amp, 230 Volt AC 50/60 Hz, Coil, 4 Normally Open Poles, No Contact Configuration, Single Pack, Line Side Coil Termination, Screw Terminals, Motor Load

Category: IEC Contactors - 4-Pole

600 SERIES ACCESSORY POWER CABLE W/ 4-WAY SCREW TERMINAL

TERMINAL STRIP MARKING TAG 5 X 10 MM

Insulated Single-Gang Pigtail, 12 AWG, Stranded Copper Incoming Lead Stripped 5/8 Inch and (1) Stranded Copper Conductor with Flanged Spade Terminal, Length: 8 Inch. Includes: GSH Ground Screw. Package of 20.

Category: Stranded Wire Ground Pigtails

Push Button, Booltess Flush Head, Black, NEMA 4/4X/13, 1 Normally Open, Standard, Contact, with Guarded Terminals, 30 mm

Category: 30mm Corrosion Resistant Pushbutton Operators

Load Switch, Neutral Terminal, for 194E - A25/32

Category: Disconnect Switch Neutral/Grounding Terminals

Fuseholder, Panel Mount, Midget Size, 30 Amp, 600 Volt AC, Straight Terminals, 1-13/32 - 1-1/2 Inch Fuse Length

Category: Panel Mount Fuse Holders

Protective Cover For Power Block, 3-pole, Clear With Write-on Surface For Fieldtermination Identification

Category: Non-Insulated Connector Block Covers

Class R Modular Knifeblade Fuseblock, 3-Pole, 201 - 400 Amp, 600V, Box Lug Terminal - Spring Clip Reinforced, Thermoplastic Base, Use with Bussmann LPS-RK, FRS-R, DLS-R & KTS-R.

Category: Class R Fuse Blocks

Lug Connector, Copper, Unplated, 14 Sol. - 4 Str., 1.28 in Length, .50 in Width

Category: 1-Conductor Copper Mechanical Lugs

Www.littelfuse.com/%7e/media/products/misc_electrical_products_and_accessories/power_distribution_splicer_blocks/technical Resources/littelfuse_powrbloks_ld_ls_datasheet.pdf

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

POWER DISTRIBUTION BLOCK 600V 150A

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 600VAC/DC, 310A, Single-Pole, SCCR: 100 kA, Black, Molded Thermoplastic Base, Tin-Plated Aluminum Connector

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 4-Pole, Line: 14-2/0 Cu, 8-2/0 Al; Load: (6) 14-4 Cu, 8-4 Al, 600V AC/DC

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

BLZP 5.08/02/180 SN OR BX

ABB Power Infeed Block, Ul508-type E

Category: Power Terminal Blocks

Compression Lug, Straight, 1-Hole Mount, Short Barrel, Copper, Tin Plated, For Code Copper Conductors, 4 AWG, 1/2 Inch Bolt Hole, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Fork Terminal, 18- 14 AWG, #6 stud size, bulk package.

Category: Non-Insulated Standard Fork Terminals