"wiremold"

3-Compartment Combination Box, Metallic, Depth: 5", Length: 8-3/4", Width: 6-3/4". Raised Floorbox, Series AF, Color: Black Tile Cover & Trim.

Category: Recessed Compartment Boxes

Stainless Steel, Base & Cover, 2000 Series. Size: 5' Length. .025 Steel, order 5' Multiples

Category: Small 2-Piece Metallic Raceway Bases & Covers

Seam Clip Fitting, DS4000 Series, Steel, Gray, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

6' Plugmold Multioutlet System with 8 single outlets 9 inches apart, GB Finish - Ivory

Category: Single Circuit Steel Plugmold

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

For AC8850 and AC8105 Boxes. Includes three (3) 6A Wiremold CM Series Open System adapters. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Accepts one dual Wiremold Open System adapter, or one Ortronics Series II adapter, or one Ortronics TracJack adapter. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Six outlets, rugged gray aluminum housing, 15A, lighted switch. 6' (1.8m) 14/3 SJT black cord with NEMA5-15 plug. Length 12 1/4" (311mm). Receptacle center-to-center 1 1/4" (32mm). Snap-on, slide-off mounting.

Category: General Duty Power Strips

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts. Finish - White

Category: 2-Gang Raceway Device Boxes

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Nickel. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Two-compartment pole (one power, one communication with cross over below power devices). Nominal material thickness .040" (1.0mm). Length 10'5" (3.2m). Two 20A 125V duplex receptacles. One Ortronics Series II adapter. One Ortronics Series II dual Cat 5e insert, two blank inserts and labeling supplies. Maximum ceiling height 10'5" (3.2m).

Category: Steel Power Poles

4000 Series Raceway Transition Fitting Wiremold OFR89-4000

Category: Metallic Overfloor Raceway Connectors & Adapters

Mini Adapter Cover Plate, For ALA3800 Series, Material: Aluminum, Length: 12 Inches, Accepts One (1) Wiremold CM2 Series Communication Connectivity Device. Includes Cover and 2A Mini Adapter, (2A-Opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloadedadapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Black"

Category: Assembled Recessed Round Boxes

2400 Series Raceway Transition Fitting Wiremold OFR89-2400

Category: Metallic Overfloor Raceway Connectors & Adapters

For installation requiring a 15A or 20 A duplex receptacle and accepts three (3) Wiremold CM@ Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

Poke-Thru Abandonment Plug, 4 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

Six rear outlets, 15A, 6' (1.8m) cord. Receptacle center-to-center 1 1/2" (38mm).

Category: General Duty Power Strips

WMD SR10N CG SURGE STRIP 6FT

Category: General Duty Power Strips

Recessed Floor Box, 4-Gang, Depth: 3-1/2 Inch, 3/4 - 2 Inch Conduit Openings, Steel

Category: Recessed Compartment Boxes

For carpet, tile and wood covered floors. For use in concrete, raised and wood floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available in a standard version for use in above grade concrete, raised, and wood floor applications. Boxes are also compatible with Wiremold Walkerflex Modular Wiring System. Custom options are available upon request. NOTE: Not designed for use with bare concrete or terrazzo floors.

Category: Recessed Adjustable Floor Boxes

Floor Box, EFB8 Series, 8-Gang, Depth 3-1/2 Inch, (24) 3/4 to 2 Inch Knockouts, Galvanized Steel, Included Components: Protective Disposable Cover, Tunnel System, (2) Removable Modules, (2) Toggle Clamps, (2) Cable Management Guides, (2) Leveling Support Legs, (2) L-Brackets, For use in Concrete Floor, Wood Floor, and Raised Floor Applications.

Category: Square Recessed Floor Boxes

Poke-Thru Abandonment Plug, 3 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

Wiremold S1mc Mud Cap

Category: Octagon Metallic Box Mud Rings