Search results

Poke-Thru Abandonment Plug, 3 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

Prewired snap-in 20A receptacle can be wired as standard duplexor isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Drop-in rubber grommet for pass-through cabling. Set of two grommets (one grommet shown) in black.

Category: Assembled Poke-Through Units

WLK 6ATC2PCRBK 6IN PRWRD SURF

Category: Assembled Poke-Through Units

8IN PREWIRED SURF STYLE ASSEMBLY SB

Category: Assembled Poke-Through Units

6IN PRWRD SURF BRUSH ALUM ASSEMBLY

Category: Assembled Poke-Through Units

WMD 10ATCPAA

Category: Assembled Poke-Through Units

WMD 4ATP4RSB

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Center-gang 2" trade size conduit service feed assembly. Designed to allow connection to 2" trade size conduit feed in two (2) of the four (4) center- gang locations.

Category: Assembled Poke-Through Units

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

WLK RC7CTCAA RC7 COVER AL FLA

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Use with AMD8C Series Covers to complete installation. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

WMD 10PPS 10IN PREPOUR SLEEVE

Category: Assembled Poke-Through Units

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Brass Finish Flange Nonmetallic Colored Brass Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

WMD 2150CHA 1-1/2IN TRADE SIZ

Category: Assembled Poke-Through Units