Bushings, K.O. Seals, & Locknuts

Oz-g 103 1-in Mall Grnd Lknut

Category: Steel Conduit Locknuts

Reducing Sealing Bushing, Conduit Size NC16/NW13 to NC12/NW10, UV Resistant Nylon Polyamide, Black

Category: Steel Reducing Bushings

Conduit Bushings, Type: Capped, Trade Size: 1-1/4 Inch, material: Malleable Iron/Zinc, For Use With Rigid/IMC Conduit

Category: Capped Bushings

1-1/2 Inch Mall Ground Locknut

Category: Steel Conduit Locknuts

Female Reducing Bushing, 1-1/2 Inch x 1-1/4 Inch, Malleable Iron, For Use With Rigid/IMC Conduit.

Category: Iron Alloy Reducing Bushings

Conduit Bushing, Threaded, 2 Inch, Malleable Iron/Zinc Plated, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Grounding Bushing, 1-1/2",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

Anti-Short Bushing, Diameter: 1/2", Material: Non-Metallic. For use with Cable Sizes: 10-4, 8-2, 8-3 & 1-1.

Category: Anti-Short Bushings

Grounding Bushing, Insulated, Size: 5 Inch, 3/0 - 6 AWG, Malleable Iron, For Use With Copper/Aluminum Conductors

Category: Threaded Ground Bushings

Split Bushing With Grounding Lug, Insulating Type, 3-1/2 Inch Diameter, 6 - 3/0 AWG, Steel With Zinc Finish

Category: Threadless Ground Bushings

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, With Bronze Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 AWG

Category: Threadless Ground Bushings

Rigid Conduit Reducer Bushing, Type Threaded, Large End Trade Size 6 Inch, Small End Trade Size 5 Inch, Material Aluminum, Standard Package 5, Approval UL, CSA, Used On Rigid Conduit/IMC, Enclosure Type Class I Group C D, Class II Group E F G, Class III

Category: Aluminum Reducing Bushings

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 2-1/2 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection: Threaded, 150 DEG C, 14 - 2/0 AWG Grounding Wire, 3-3/8 IN Outside Diameter, 7/8 IN Width, 2-1/2 IN Turning Radius With Lug, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Threaded Ground Bushings

OZG ABB-350 3-1/2 IN COMBO BS

Category: Rigid & IMC Bushings

THB LN 205 1.5 INCH LOCKNUT R

Category: Die Cast Conduit Locknuts

Three-Piece Knockout Seal, 2-1/2 Inch, Bolt-On, Steel

Category: 3-Piece Knockout Seals

OZG BBL-100 150D INS BUSHING

Category: Rigid & IMC Bushings

Bushings Malleable Iron, 1-1/2 In. Trade Size

Category: Rigid & IMC Bushings

OZ-Gedney Type IB Non-Grounding Insulating Bushing, Size: 1-1/4 IN, Polypropylene, Gray, Connection: Threaded, 105 DEG C, 2 IN Maximum Diameter, 9/16 IN Maximum Height, Third Party Certification: UL File Number E-11853, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, For Threaded Rigid Conduit And IMC

Category: Threaded Ground Bushings

Conduit Bushing, Size: 1-1/4 Inch, Material: Aluminum, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Conduit Locknut, 3-1/2 Inch Diameter, Threaded, Zinc Die Cast, For Use With Rigid/IMC Conduit

Category: Die Cast Conduit Locknuts

Reducing Bushing, Threaded, 3 Inch x 2-1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

NSI CP250 250 MCM CABLE ENTRY

Category: Capped Bushings

RAC 1223 BSHG GRND FDTHRU 3/4" TS

Category: Threaded Ground Bushings