Search results

Ladder Rack, Movable, Cross-memb., Bulletin Dcr (ladder Tray), Size/dims: Fits 12.00, Material/finish: Steel/gray

Category: Straight Wire Basket

90 Deg Elbow Inside Cover, Bulletin F23 (stainless Type 1 Clean Tray? Cable Tray), Size/dims: 3.00x3.00, Material/finish: Ss Type 304

Category: Straight Wire Basket

CBF CFG50/100EZ

Category: Straight Wire Basket

CBF RADT9012KIT6EZ

Category: Cable Tray Splicer Kits

6" Center Hanger - Only one threaded rod is needed to suspend tray. Suspension tube protets cables. Balanced loading is recommended Black Painted for indoor use

Category: Cable Tray Center Hangers

CBF UFS150200PG

Category: Cable Tray Mounting Hardware

12.25 length cable drop out kit Protects cables when exiting and entering tray Slotted design allows for cable tie or velcro tiewrap cable attachment 7 inch radius bend eases strain on cables kit contains two EZBN 1/4 and two CE25 with one drop out Black Powder Coated for indoor use

Category: Cable Tray Drop Outs

CBF FASPCH300BL

Category: Cable Tray Center Hangers

Ladder Rack, Junction Splice Kit, Material/Finish: Steel/Zinc

Category: Cable Tray Splicer Kits

90-Degree Horizontal E-Bend Section (cULus Classified), fits 12.00, Gray, Steel

Category: 90° Horizontal Cable Tray Bend

Ladder Rack, Butt Splice Kit, Material/Finish: Steel/Zinc

Category: Cable Tray Splicer Kits

The fiber mounting FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 12" (305mm) width is used to support a FiberRunner® 4x4 and 6x4 Channel above or below the Wyr-Grid® 12" Pathway using the same 1/2" or 12mm threaded rod used to support

Category: Cable Tray Trapeze Hangers

Vertical Wall Bracket, Bulletin Dcr (Ladder Tray), Size/Dims: 10 Mm Mounting Hole, Material/Finish: Steel/Gray

Category: Cable Tray Mounting Hardware

Straight Section, Bulletin F23 (stainless Type 1 Clean Tray? Cable Tray), Size/dims: 3.00x3.00x120.00, Material/finish: Ss Type 304

Category: Straight Channel Cable Tray

45-Degree Elbows, 4.00x4.00, SS Type 304

Category: 45° Horizontal Cable Tray Bend

Tee Front Cover, 90°, Type 1, Stainless Steel, 4" x 4"

Category: Cable Tray Horizontal Tees

Used to carry the cables horizontally throughout the system. Accepts hinged cover HC2BL6. Use QuikLock Coupler FBC2X2BL to attach channel and/or fittings. Base and covers sold separately.

Category: Straight Channel Cable Tray

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

4 inch x 8 inch x 10 foot section of wiremesh cable tray constructed of precision engineered high quality welded steel wire and can be adapted to fit any installation on-site Our patented UL Classified painted wire tray is classified as an EGC Equipment Grounding Conductor

Category: Straight Wire Basket

CBF RADT90KIT6BL

Category: Cable Tray Splicer Kits

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

4 inch x 8 inch x 10 foot section of wiremesh cable tray constructed of precision engineered high quality welded steel wire and can be adapted to fit any installation on-site Hot Dipped Galvanized tray is ideal for exterior applications

Category: Straight Wire Basket

Ladder Rack, Radius Drop, Bulletin Dcr (Ladder Tray), Size/Dims: Fits 6 Inch Runway Cable, Material/Finish: Aluminum/Black

Category: Cable Tray Mounting Hardware

1 T or 2 90° Bend Kit, 2" Deep Radius

Category: Cable Tray Splicer Kits