Boxes & Enclosures

Enclosure, NEMA 4, Type: Concept HMI With Black Extrusions, 450 x 550 x 120 mm, Material/Finish: Steel/Gray

Category: NEMA 4 Instrumentation Enclosures

In-Use Cover, 1-Gang, Vertical Mount, Weatherproof, Non-Metallic, White. Includes: (1) Duplex, (1) Decorator/GFCI Receptacle Faceplate, Gasket and Screws. For Use with Recessed Boxes.

Category: 1-Gang Weatherproof In-Use Box Covers

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

Switch/Outlet Box, 1-Gang, One-Piece, Non-Metallic, Cubic Inches: 18.0

Category: Non-Metallic Old Work Switch / Outlet Boxes

Duplex Receptacle Cover With (2) Threaded Plugs, 1-Gang, Includes: Cover, Gasket, and Tamper Resistant Receptacle, Material: Nickel Plated

Category: Square / Rectangle Recessed Box Covers

1/2" Stud Mount, Level Jack, Application: Alignment Tabs Reach Across Wood/Metal Studs to Level Low Voltage Outlets with A.C. Boxes.

Category: Enclosure Mounting Bracket Kits

2-Gang, FSS Type, Malleable Iron Ridge Top, Cast Box. Hub Size: 3/4". Box Depth: 2.00" Includes: Internal Ground Screw. For use with Threaded Rigid Metal Conduit.

Category: 2-Gang Malleable Iron FS & FD Device Boxes

Adjustable Bar Hanger, 12 - 18 Inch Length, Steel, Allows For One or Multiple Boxes Between Studs

Category: Metallic Bar Hangers

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRTA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18.0 Cubic Inches and (4) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof TA Conduit Outlet Boxes

AJBEW Cast Junction Box With Bolt-On Cover, Explosionproof, Dust/Ignitionproof, 21(L) x 21(W) x 12.39(D) Inch, NEMA 7/9, Horizontal and Vertical Mounting Feet, Inner Dimensions 16.5 Inch(L) x 16.5 Inch(W) x 8.38(D) Inch, Sand Cast Copper-Free Aluminum, Includes Stainless Steel Cover Bolt, Neoprene O-Ring, and Galvanized Steel Mounting Pan

Category: Hazardous Locations - Industrial Enclosures

Recessed Entertainment Box With Angled Openings, White, Non-Metallic, For Use in New/Old Work Applications

Category: Recessed Home Entertainment Boxes

Single Gang Metal Covers with Flip Lids

Category: Recessed Floor Box Service Fittings

Power Meter UL Enclosure, NEMA 4X, 5.320 x 7.280 x 3.350 Inch, Clear Hinge Cover, Non-Metallic

Category: Polycarbonate Hinge Cover Enclosures

Sliding Equip.shelf, 19", Bulletin Daccy (datacom Accessories And Hardware), Size/dims: 2u, Fits 600-800mm, Material/finish: Steel/black

Category: Enclosure Shelves

Multi-Service Divider Kit. For use with Non-Metallic.

Category: Recessed Floor Box Service Dividers

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Duplex Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Brass

Category: Round Recessed Box Covers

<p>Brass GFI receptacle cover plate, 4 1/4'' (108mm) for tile. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.</p>

Category: Round Recessed Box Covers

Switch Box, 4-Device, 3-1/2 Inch Deep, Cubic Inches: 81.0, Mounts Directly to Steel or Wood Stud, Non-Metallic

Category: Non-Metallic New Work Switch / Outlet Boxes

CAM-LIGHT Box for Suspended Ceiling, Steel, 24 Cubic Inches

Category: Metallic Ceiling Support Boxes

Flush Cover for Pull Box is used on pullboxes when flush intallations are needed. This Flush Cover for Pull Box, AFE24X18 item fits 24.00x18.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Flush Covers

SWING PANEL BRACKET KIT 4HINGE 36h-60h

Category: Interior Enclosure Panels

Enclosure, J Series, Hinged, 4 Cover Screws, 8 x 6 x 4 Inch, Fiberglass/Gray

Category: Fiberglass Screw Cover Junction Boxes

Underground Rectangular Box, (L) 10 Inch x (W) 15 Inch x (D) 12 Inch, Material: Composite. Lid is not included. See item 295844 for corresponding lid.

Category: Rectangular Non-Metallic Underground Pull Boxes

QUA PG2436CA0009

Category: Non-Metallic Underground Pull Box Covers