Boxes & Enclosures

Composite Lid, R Series, W x L x D: 10" x 15" x 1-3/4", Lid Marked: "Communications", Skid Resistant. ***Does Not Include Bolts***

Category: Non-Metallic Underground Pull Box Covers

Load Center, Ground Bar Kit, 5 Circuit, Range # 14 - 4 AWG, Copper or Aluminum Wire, for QO, NQOD type Panels

Category: Enclosure Mounting Bracket Kits

FS Box, Weatherproof, Dead-End, 2-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 2-Gang Non-Metallic FS & FD Device Boxes

Screw Cover Junction Box, Scepter Series, NEMA 4X, 12 x 12 x 6 Inch, PVC, Gray

Category: PVC / Polyester Screw Cover Junction Boxes

2-Gang, Nail-On, Switch/Outlet Box, Non-Metallic, Depth: 3-1/2". Cubic Inches: 35".

Category: Non-Metallic New Work Switch / Outlet Boxes

Screw Cover Junction Box, Scepter Series, NEMA 4X, 8 x 8 x 4 Inch, PVC, Gray

Category: PVC / Polyester Screw Cover Junction Boxes

4" Octagon Box With Bar Hanger, 1-1/2 Inch Deep, 22-1/2 Inch Length, Steel, Includes AC/MC/Flex Clamps

Category: Octagon Metallic Ceiling Boxes With Hangers

4 Inch Square, Exposed Work Cover, Type: (2) Toggle Switch, 1/2 Inch Raised, Drawn, Metallic, Cubic Inches: 5.0

Category: 4" Square Metallic Box Covers

Round Floor Box, Diameter: 6 Inch, Depth: 6 -7/16 Inch, 2 Inch and 1-1/4 Inch Hubs, Non-Metallic, Reusable Concrete Cap

Category: Round Recessed Floor Boxes

Panel, 46.20x22.20, Size/Dims: fits 48.00x24.00, Material/Finish: Steel/White.

Category: Enclosure Back Panels

Round Floor Box Cover, 1-Gang, Includes Duplex TR Receptacle, Gasket, Floor Leveling PVC Ring, High Impact Nylon, Brushed Brass Plated Cover

Category: Poke-Through Mounting Plates

For mounting the system to a horizontal surface for 300-degree rotation at point of attachment. This Compact Series 2 Set-Up Joint, CCS2SJLG item fits 45x60mm with a material of Aluminum color Lt Gray.

Category: Industrial Consolet Mounting Accessories

Wall-Mount, Type 4X, Enclosure, Clamp Cover, Size/Dims: 24.00x24.00x8.00, Material/Finish: SS Type 304.

Category: Stainless Steel Wall Mount Enclosures

Adjustable Leveling Ring. Diameter: 4". Height: 1-1/8". For use with: Ratchet-Pro Series PVC Floor Boxes.

Category: Recessed Box Adapters

Screw-Cover Gasketed Type 3 used as junction, pull or terminal box in windblown dust or rain applications. This Screw-Cover Gasketed Type 3, A18186GSC item measures 18.00x18.00x6.00 inches with a material of Steel finish Galvanized.

Category: NEMA 3R Screw Cover Enclosures

Single Gang While-In-Use Universal Shallow Cover, 2-5/32 Inch Internal Depth, Clear, Non-Metallic, For use with Duplex, GFI, Switch and Single Receptacles

Category: 1-Gang Weatherproof In-Use Box Covers

Stackable Box, Underground, (W) 17 Inch x (L) 30 Inch x (D) 18 Inch, Open Base, Precast Polymer Fiberglass Reinforced Concrete

Category: Rectangular Concrete Underground Pull Boxes

Handy Box, Deep, Welded, Depth: 2-18", Knockouts - Sides: (4) 1/2", (2) Eccentric KO, Ends: (2) 1/2", Bottom: (2) 1/2"

Category: Metallic Handy Boxes

2 In. Deep, with Lugs - White Three Threaded Outlets - 4-1/2 In. x 2-3/4In.

Category: 1-Gang Metallic Weatherproof Boxes

Type 4X, Clamp-Cover Terminal Boxes provide corrosive, outdoor protection of electrical connections. This Clamp Cover Junction Box Type 4X, A404NFSS item measures 4x4x3 inches with a material of SS304.

Category: Stainless Steel Clamp Cover Junction Boxes

4 Inch Square Cover, 1-Device, Mud Ring, 1 Inch Raised, Drawn, Metallic

Category: 4" Square Metallic Box Mud Rings

Wall Mount, Type 3R, Enclosure, Screw Cover, Size/Dims: 3R, 30" x 30" x 12 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 3R Screw Cover Enclosures

Panel For Concept Enclosure, 20 Inch x 20 Inch, Material: Steel, Finish: Conductive

Category: Enclosure Back Panels

4 Inch Octagon Ceiling Box, Metallic. Depth: 2-1/8 Inch. Side Knockouts: (2) 1/2 Inch. Bottom Knockout: (3) 1/2 Inch Fan Weight: 75 lbs. Fixture Weight: 150 lbs. Cubic Inches: 22.4 Inch. Includes: Blank Cover.

Category: Metallic Ceiling Support Boxes