Boxes & Enclosures

Hyshed Hinge Cover Enclosure, Wall Mount, NEMA 4X, 15 Degree Slope Top, 16 x 16 x 8 Inch, Stainless Steel, Rated For Sanitary Washdown Cleaning Procedures.

Category: Stainless Steel Wall Mount Enclosures

Enclosure, Continuous Hinge with Clamps, NEMA 12, 10 x 10 x 8 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 12 Hinge Cover Junction Boxes

Weatherproof Box, 1-Gang, Non-Metallic, Type "T", (3) 1/2" Threaded Outlets (1 in each end, 1 in back). Cubic Inches: 18". Gray. Includes: Mounting Feet. For Use with Non-Metallic Wiring Systems Only.

Category: 1-Gang Non-Metallic Weatherproof Boxes

Oil-Tight Hole Seal, For 1/2 Inch Conduit Holes, Painted Steel

Category: Painted Steel Enclosure Hole Seals

Underground Enclosure, 24 x 36 x 18 Inch, Tier 22, Open Bottom, Polymer Concrete

Category: Rectangular Concrete Underground Pull Boxes

Mulberry; Electrical Box Cover; Toggle/Single Receptacle; Material: Steel; Finish: Powder Coated; Size: 4 IN X 1/2 IN Raised; Old Number: 19TS; Universal Key Number: RS1

Category: 4" Square Metallic Box Covers

3.5" Dia. Round Fixture Support Box For Use With Nonmetallic Sheathed Cable

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

Flat Gang Box Cover, Round 5" Diameter, Steel

Category: Metallic Ceiling Box Covers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

VSCU20-2 PVC WP DBL GANG COV. TOGGLE SWITCH SCEPTER

Category: 2-Gang Non-Metallic Weatherproof Box Covers

HUBBELL FBMPREC

Category: Recessed Floor Box Service Fittings

Adapter Collar, Square, Metallic, For Non-Metallic Boxes

Category: Recessed Box Adapters

3-1/2" Octagon Box, 1-1/2 Inch Deep, Galvanized Steel, 1/2 Inch Knockouts, Cubic Inches: 11.8, Flat Bracket Offset 1/2 Inch from Face, Non-Metallic Cable Clamps (LC) for Metal-Clad Cable, Two Ears, One on Each of Two Opposite Sides

Category: Octagon Metallic Boxes With Brackets

4 Inch Octagon Box Cover, Type: Blank, Steel

Category: Octagon Metallic Box Covers

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, 1-13/32 Inch Diameter Hole, Galvanized Steel, For use with One Single Flush Receptacle

Category: 4" Square Metallic Box Covers

4" Octagon Box with Non-Metallic Sheathed Cable Clamps, Drawn, Metallic. Depth: 1-1/2". Side Knockouts: (2) 1/2 & (8) 21/32"(priouts). Bottom Knockouts: (1) 1/2". Cubic Inches: 15.5".

Category: Octagon Metallic Boxes

RAC 5374-1 ROUND WEATHERPROOF

Category: Octagon Metallic Box Covers

Panel for Medium Enclosure, Type 1. This Panel for Medium Enclosure Type 1, A16N16MP item fits 16x16 inches with a material of Steel colored White.

Category: Enclosure Back Panels

Panel for Type 3R, 4, 4X, 12 and 13 Wall-Mount or Free-Stand/Floor-Mount Enclosures. This Panel for Type 3R; 4; 4X; 12 and 13 Enclosure, A24P16 item fits 24x16 with a material of Steel colored White.

Category: Enclosure Back Panels

OZ-Gedney Type FS-1 Cast Device Box Cover With Lid, Aluminum, Finish: Aluminum Enamel, Number Of Outlet: (1) Ground Fault Receptacle, Device Box, Screw Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicabl

Category: Device Box Covers - Aluminum

Gang Box Cover, 3 Gang, Flat, Blank, Drawn, Steel

Category: Metallic Gang Box Covers

4" Square, Exposed Work Cover, Type: Single Receptacle, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7". Opening: 2-1/2".

Category: 4" Square Metallic Box Covers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Features: 1 Gang, Application: Fs, Fd Boxes, Standard: Ul 514a, Csa C22.2, Fed Spec: A-a-50563, NEMA: Fb-1, Os-1, Material: Steel, Finish: Zinc-electroplated

Category: Steel FS & FD Device Box Covers