Boxes & Enclosures

Rectangular Floor Box Assembly, Adjustable, Depth: 4 Inch, Type: Duplex, 2 Flip-Lid, Light Almond

Category: Recessed Adjustable Floor Boxes

4-11/16 Inch Square Extension, Welded, 2-1/8 Inch Depth, 1/2 and 3/4 Inch Knockouts, Steel

Category: 4-11/16" Square Metallic Box Extension Rings

FSS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 1 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes

Steel Checker Cover, 2-Piece, 40 x 28 Inch, with (4) Bolts, Legend: Electric

Category: Metallic Underground Pull Box Covers

3-1/2IN GANG SW BX

Category: Metallic Switch / Outlet Boxes With Brackets

Weatherproof Cover, 1 Gang, Blank Type, Steel, Gray, Gasket Included.

Category: 1-Gang Metallic Weatherproof Box Covers

Four Gang Electrical Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic New Work Switch / Outlet Boxes

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

ORB 4SB-50-EXT 4IN SQ BOX 1-1/2 DP

Category: 4" Square Metallic Box Extension Rings

JBA30 3IN PVC JUNCTION BOXADPT KRALOY

Category: Box To Box Connectors

Wall Mounting Brackets, Masterial: Stainless Steel, For Use With Series: KL, EB/JB and AW/WM Enclosures.

Category: Enclosure Mounting Bracket Kits

Cover, Polymer Concrete, Tier 8, 13"x24"

Category: Concrete Underground Pull Box Covers

1-Gang, FSC Type, Malleable Iron Ridge Top, Cast Box. Hub Size: 1/2". Box Depth: 2.00" Includes: Internal Ground Screw. For use with Threaded Rigid Metal Conduit.

Category: 1-Gang Malleable Iron FS & FD Device Boxes

Panel For Enclosure, 48" x 42", Type 3R, 4, 4X, 12/13, Steel, White Powder Coat Finish

Category: Enclosure Back Panels

4 Inch Square Box With Raised Ground, Old Work Type, Welded, 2-1/8 Inch Depth, Side Knockouts: (8) 1/2 Inch, (4) 1/2 and 3/4 Inch, Bottom Knockouts: (2) 1/2 Inch, (2) 1/2 and 3/4 Inch, 30.300 Cubic Inches, Steel, Includes RETRO-RING That Accepts Box Mounting of One or Two Devices

Category: 4" Square Metallic Boxes

One-gang blank housing assembly. Designed to blank off compartment when no devices are used. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Recessed Floor Box Service Fittings

4" Square Cover, 2-Device, Mud Ring, 1-1/4" Raised, Drawn, Metallic

Category: 4" Square Metallic Box Mud Rings

Round Ceiling Fan Box Without Support Bar Hanger, 1/2" Deep, (2) 1/2" Conduit Knockouts. UL Standard 514A, UL Listed E2527, Nema: OS-1

Category: Metallic Ceiling Pans

Masonry Box, 2-Gang, 3-1/2 Inch Depth, Non-Gangable, Side Knockouts: (4) 1/2 and 3/4 Inch Concentric, End Knockouts: (4) 1/2 and 3/4 Inch Concentric, Bottom Knockouts: (4) 1/2 and 3/4 Inch Concentric, Welded, Cubic Inches: 45.0, Material: Steel. Integral Brackets Securely Hold Power and Data Outlets to Concrete Block from Front and Back in Masonry Walls, Even in Irregular Cut Openings.

Category: Non-Gangable Masonry Boxes

Floor Box, 2- Gang, Square, Depth: 3-5/8 Inch, Slab Box with Molded Connector, Knockouts: (8) 3/4 Inch, Material/Finish: PVC, Cubic Inches: 44

Category: ENT Quick Connect Switch / Outlet Boxes

Adjustable Sliderbar Box Kit, Includes: (1) SL24 SliderBar 15 - 24 Inch Adjustable Length, (1) SLB101 1-Gang Non-Metallic Box With Installation Screws and Slider Clip

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Louver Plate Kits provide enclosure ventilation for excessive internal heat and moisture. This Louver Plate Kit, AVK33 item measures 3.88x4.50 inches with a material of Steel colored Gray ANSI 61.

Category: Cooling Fan Exhaust Grills

FSC10 1/2" PVC FSC SING. GANG BOX SCEPTER

Category: 1-Gang Non-Metallic Weatherproof Boxes