Search results

Coupler fitting for use with LD3, LDPH3, and LDS3 raceway, White, ABS, Length 1.00 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 6.00 ft, Width 0.77 in.

Category: 2-Piece Non-Metallic Raceway

Tee fitting for use with LDPH10 raceway only, Off White, ABS, Length 3.18 in.

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Reducer fitting for use with LD3, LDPH3, LD10 and LDPH10 raceway. For in-line terminations, use with CFX10, Off White, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tee fitting for use with LD5, LDPH5, and LDS5 raceway, Electric Ivory, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Tee fitting for use with LD5, LDPH5, and LDS5 raceway, Off White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Panduct® type G wide slot wiring duct, 2 W x 1 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wide Slot Wiring Duct, 3" W x 2" H x 6' L, PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

End Cap Fitting For Use With LDPH3 And LDS3 Raceway, Off White, ABS, Length 0.87 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Panduct® type F narrow slot wiring duct, 3 W x 4 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Power rated drop ceiling/entrance end fitting for use with LD3, LDPH3, LDS3, LD5, LDPH5, LDS5, LD10 and LDPH10 raceway. Use CA3 or CA5 adapters for LD3/LDPH3/LDS3 and LD5/LDPH5/LDS5 profile raceway, adapters not required for LD10 and LDPH10 raceway, Electric Ivory, PVC, Length 4.1 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Panduct® type FS solid wall wiring duct, 6 W x 4 H, 6' length, PVC, adhesive, light gray.

Category: 2-Piece Non-Metallic Raceway

Inside corner fitting. Used to join sections of T-70 raceway at inside corners

Category: 2-Piece Non-Metallic Raceway Elbows

Outside Corner Fitting For Use With LDPH10 and LD2P10 Raceway, White

Category: 1-Piece Non-Metallic Raceway Elbows

Net-Contain™ Universal Aisle Containment Vertical Wall Brace - 4ft. (1200mm) aisle width, white.

Category: Wall Duct Dividers

Panduct® type F narrow slot wiring duct, 3 W x 2 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

Panduct® type F narrow slot wiring duct, .75 W x 1.5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 3 W x 4 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type F narrow slot wiring duct, 3 W x 4 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

End cap fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Panduct® type MC metric narrow slot wiring duct, 37mm W x 62mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Panduct® type FS solid wall wiring duct, 1.5 W x 1.5 H, 6' length, PVC, light gray.

Category: 2-Piece Non-Metallic Raceway

Panduct® type FS solid wall wiring duct, 3 W x 2 H, 6' length, PVC, white.

Category: 2-Piece Non-Metallic Raceway