Connectors, Crimps, & Termination

Butt Connector, Nylon-Insulated, Seamless, Wire Range: 12 - 10 AWG, 600V, Color: Yellow. Package of 50. **Order in Multiples of 50**

Category: Nylon Insulated Butt Connectors

Mechanical Lug, without Saddle, Cast Copper, 1 Barrel, 1 Hole Mount, Rated for Copper Conductors Only, 4 AWG to 1/0 AWG, Bolt Hole: 3/8 Inch, Socket Set Screw

Category: 1-Conductor Copper Mechanical Lugs

StrongHold™ Butt Splice, Vinyl Insulated, 16 - 14 AWG, Blue.

Category: Vinyl Insulated Butt Connectors

Split Bolt, Aluminum, Run: 6 to 2 AWG, Tap: 8 to 2 AWG, Rated for Aluminum and Copper Conductors

Category: Aluminum Split Bolts

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range 250 MCM - 400 MCM, Insulation Diameter Range 0.67 Inch - 1.38 Inch, Relaxed Tube Length 12.0 Inch. For use with all Solid Dielectric (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

Ring Tongue Terminal, Nylon-Insulated with Insulation Grip, Wire Range: 12 - 10 AWG, 600V, Stud Size: 1/4, Color: Yellow. Package of 50. **Order in Multiples of 50**

Category: Nylon Insulated Ring Tongues

Compression Buttsplice, Copper, Tin Plated, 350 MCM, Long Barrel, 4.35 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 volts to 35 kV, Color Code Red

Category: Long Barrel Copper Compression Sleeves

Bare Wire Ground Clamp, Open Lug, 3/8 to 1", Wire Range: 10 to 2 AWG, Bronze

Category: Rebar Ground Clamps

Mechanical Lug, Aluminum, 3 Barrel, 2 Hole Mount, Dual Rated for Copper or Aluminum, 14 AWG to 2 AWG, Bolt Hole: 5/16 Inch, Hole Spacing: .88 Inch, (1) Slotted Set Screw per Conductor

Category: 3-Conductor Aluminum Mechanical Lugs

Female, Vinyl-Insulated, Wire Range: 12 - 10, Stud Size: 1/4, Color: Yellow, 25/PK

Category: Female Vinyl Insulated Wire Disconnects

Ring Tongues, Vinyl-Insulated, Wire Range: 16 - 14, Stud Size: 10, Color: Blue, 25/PK

Category: Vinyl Insulated Ring Tongues

Plus cups are premeasured, self-contained cups of welding material that are placed in the mold and ignited by use of the Plus Impulse Exothermic Welding Control Unit, 90PLUSF20 colour code gray.

Category: Plus Welding Material

Distribution Block Cover, 3 Pole, for 1492-PD Mini Blocks

Category: Non-Insulated Connector Block Covers

Finger Safe Power Distribution Block, 600 V, 380 A, 1 Pole, 6 AWG-500 kcmil, 14-2 AWG, 6-2 AWG, 14-8 AWG

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Compression Lug, Straight, 2-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 600 MCM, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Black, No Inspection Window

Category: 2-Hole Aluminum Compression Lugs

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Black, Shrink Ratio: 2:1, Size: 3/8", Expanded Insulation Diameter: 0.375", Recovered Insulation Diameter: 0.187", Tube Length: 48". Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Clear, Shrink Ratio: 2:1, Size: .06 Inch, Expanded Insulation Diameter: .06 Inch, Recovered Insulation Diameter: .03 Inch, Tube Length: 100 Foot Reel. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Square D,POWER DISTRIBUTION BLOCK 600V 175A,(1)#14 to #2/0 AWG (1)#14 to #2/0 AWG,175A 135A,600 V AC,9080LB,9080LB23,General Purpose Phenolic,Lugs Tin Plated Aluminum,Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

KUP-L-Tap Insulation Piercing Copper Connector, Dual Rated, Main Conductor Range 4/0-4, Tap Range 6-14, Tin Plated, UL, CSA

Category: Splices - Insulation Piercing

Insulated Pigtail, 12 AWG Solid Copper Lead Stripped 1", 6-1/2" Length, Includes: GSH Ground Screw, Tube Package of 50

Category: Solid Wire Ground Pigtails

Female Disconnect, Nylon Fully Insulated, 16 to 14 AWG, .250 Inch x .032 Inch Tab, Blue, Package of 100 Each.

Category: Female Nylon Insulated Wire Disconnects

Rebar Ground Clamp, Rebar Size: #4/5/6, Diameter: 1/2 to 3/4 Inch, 6 to 4/0 AWG, Bronze

Category: Rebar Ground Clamps

Ring Terminal, Nylon Insulated, 12 to 10 AWG, 1/4 Inch Stud Size, 600 Volt, Yellow, Package of 50

Category: Nylon Insulated Ring Tongues

Type GH Swivel Ground Hub, 4/0 AWG - 500 MCM, Length: 1-7/8 IN, Size: 1-1/4 IN, Cast Bronze, Screws: Brass, 2-11/16 IN Height, Dimension B: 2-1/2 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub