"lpfcm14-a-d14"

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a blue, oversized nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm?). It is 0.91" (23.1 mm) long and 0.45" (11.4 mm) wide. The disconnect has a standard barrel configuration and a butted seam barrel. It comes in bottles of 25.

Category: Male Nylon Insulated Wire Disconnects

Butt Connector, Nylon-Insulated, 16 - 14 AWG, Blue, 100 Pack

Category: Nylon Insulated Butt Connectors

Pin Terminals, Vinyl-Insulated, Wire Range: 22 - 18, Terminal Type: Pin, Color: Red, 100/PK

Category: Vinyl Insulated Pin Terminals

The vibration resistant male disconnect is made of copper and is nickel-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm¦). It is 0.98" (24.9 mm) long and 0.25" (6.4 mm) wide. The disconnect has a funnel entry barrel configuration and a brazed seam barrel. It comes in bottles of 50.

Category: Male Vinyl Insulated Wire Disconnects

Heat Shrink, Thin-Wall, 3/0 - 4 AWG, 3:1 Ratio, Minimum Recovered: 0.75 Inch, Maximum Recovered: 0.31 Inch, Length: 48 Inch, Black

Category: Thin Wall Heat Shrink

Nylon-Insulated, Wire Range: 16 - 14, Color: Blue, 500/PK

Category: Nylon Insulated Butt Connectors

Heat Shrink, 1/16 Inch, Thin Wall, 4 Foot, Black, 600 Volt, Color: White, Shrink Ratio: 2:1, Size: 1/16 Inch, Expanded Insulation Diameter: .063 Inch, Recovered Insulation Diameter: .031 Inch, Tube Length: 4 Foot Piece.

Category: Thin Wall Heat Shrink

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a red, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm¦). It is 0.81" (20.6 mm) long and 0.29" (7.4 mm) wide. The disconnect has a funnel entry barrel configuration and an insulation grip sleeve barrel. It comes in bottles of 100.

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a red, nylon housing. It has a tab size of 0.110 x 0.020ö (2.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm¦). It is 0.69" (17.5 mm) long and 0.15" (3.8 mm) wide. The disconnect has a funnel entry barrel configuration and an insulation grip sleeve barrel. It comes in bottles of 100.

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a red, nylon housing. It has a tab size of 0.110 x 0.032" (2.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm¦). It is 0.69" (17.5 mm) long and 0.15" (3.8 mm) wide. The disconnect has a funnel entry barrel configuration and an insulation grip sleeve barrel. It comes in bottles of 100.

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect in metallic brass helps overcome the failures caused by high vibration. It has a tab size of 0.187 x 0.020" (4.8 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.58" (14.7 mm) long and 0.23

Category: Male Non-Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, standard receptacle nylon housing. It has a tab size of 0.187 x 0.020" (4.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a yellow, nylon housing.It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm²). It is 0.96" (24.4 mm) l

Category: Female Nylon Insulated Wire Disconnects

3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.

Category: Heavy Wall Heat Shrink

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78" (19.8 mm) lon

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.94" (23.9 mm) lon

Category: Female Nylon Insulated Wire Disconnects