Connectors, Crimps, & Termination

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 3/0 AWG, 3/8 In Bolt Hole, 1 In Hole Spacing, Coded Orange, No Peep Hole

Category: 2-Hole Long Barrel Copper Compression Lugs

Aluminum Mechanical Lug, Conductor Range 2/0-14, 1 Port, 1 Hole, 1/4in Bolt Size, Tin Plated, UL, CSA

Category: 1-Conductor Aluminum Mechanical Lugs

6-PORT IN-SURE PUSH-IN WIRE CONNECTOR 200/JAR

Category: 6-Port Push-In Wire Connectors

Insulated Ferrule, Single Wire, 18 AWG, DIN End Sleeve, Red, 17/32" Wire Strip Length, 0.12" Max Wire, 500 Pack

Category: Single Insulated Ferrules

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 2 AWG, 3/8 Inch Bolt Hole, 600 Volt to 35kV, Coded Pink, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs

Ground Rod Threaded Coupler, Diameter: 3/4". For use with Copper bonded Rods.

Category: Ground Rod Couplings

Ground Clamp, 2-1/2 to 4 Inch, 4 to 10 AWG, Bronze

Category: Bare Wire Ground Clamps

Twister® ProFLEX Wire Connector, 1000V Max Voltage, Thermoplastic Polypropylene with Thermoplastic Elastomer Housing, Steel Insert, Zinc Plating, Red/Yellow, Box of 50

Category: Color Coded Twist On Wire Connectors

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 750 MCM, 1/2 Inch Bolt Hole, 1-3/4 Inch Hole Spacing, Coded Black, With No Inspection Window, Voltage Rating 600 -35000, Temperature Rating 90 Degree Celsius

Category: 2-Hole Long Barrel Copper Compression Lugs

Secure Grip Wire Connector SG-Y, Yellow, Pouch

Category: Color Coded Wire Connectors

Compression Lug, Straight, Long Barrel, 1-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 1/0 AWG, 1/2 Inch Bolt Hole, Coded Pink, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Long Barrel Copper Compression Lugs

C-Tap Connector, Copper, Thin Wall, 8 - 6 AWG Run, 12 - 8 AWG Tap, Color Coded Gray

Category: C-Tap Press-On Lugs

Insulated Ferrule, Single Wire, 22 AWG, Copper. 8 mm Pin Length

Category: Single Insulated Ferrules

F20 welding material is primarily used for grounding and bonding applications. It is poured into the mold and ignited with a flint ignitor. Contains approx 65 grams of weld metal and small quantity of starting material.

Category: Traditional Welding Material

Insulated Ferrule, Single Wire DIN End Sleeve, 8 AWG, Red, 5/8" Wire Strip Length, .30" Max Wire Insulation, Pack of 100

Category: Single Insulated Ferrules

Compression Lug, 1-Hole, Copper, 2 AWG, 5/16" Stud Hole, Color Coded Brown, Standard Barrel with Inspection Window

Category: 1-Hole Copper Compression Lugs

Butt Splice, Vinyl Insulated, 12 - 10 AWG, Yellow, Pack of 25

Category: Vinyl Insulated Butt Connectors

StrongHold™ Female Disconnect, nylon fully insulated, 16 - 14 AWG, .250 X .032 tab size.

Category: Female Nylon Insulated Wire Disconnects

NSI 2-OT AL DBL LUG

Category: 2-Conductor Aluminum Mechanical Lugs

Corrosion-resistant couplings ensure permanent, low resistance copper-to-copper connections. They are corrosion-resistant couplings ensure permanent, low resistance copper-to-copper connections. These are used for 5/8" ground rods.

Category: Ground Rod Couplings

Distribution Block, Cover, 1P, for 225 - 380 Amp, 1492-PD

Category: Non-Insulated Connector Block Covers

9/16 STUD-1/2 ALLEN 1-600/(2)1/0-250 LUG ACCESORIES

Category: 1-Conductor Aluminum Mechanical Lugs

Terminal Strip, Wire Range: 22 - 10 AWG, 6 Circuits, 30 Amps, 600V, Center Spacing: 0.562", Terminal Screw Size: #8-32 Philsot

Category: Terminal Strips

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 2 AWG - 4/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.37" - 1.10", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink