Connectors, Crimps, & Termination

Heat Shrink Tubing, 4' Long Stick, 2:1 Shrink Ratio, 3/8", 9.5/4.8 Dia, PO, Red, 15/pkg

Category: Thin Wall Heat Shrink

Female Disconnect, Nylon, Fully-Insulated, 22-18 AWG Copper, Red, .205 x .020 Tab, 1000 per Pack

Category: Female Nylon Insulated Wire Disconnects

Power Distribution Block, 600VAC/DC, 350 A, Single-Pole, SCCR: 10 kA, Black, Molded Thermoplastic Base, Tin-Plated Aluminum Connector, Line: (2) 14-2/0 Cu, 8-2/0 Al; Load: (6) 14-4 Cu, 8-4 Al

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Cable Accessory Sealing Kit, 0.95"-1.94", 1 Cold Shrink Sealing Tube, 3 Mastic Sealing Strips

Category: Medium Voltage Cold Shrink Adapter Kits

Ring Terminal, Brazed Seam, 22 - 16 AWG, Copper With Tin Finish

Category: Non-Insulated Ring Tongues

Resin Splice Kit, Wye-Resin, Maximum Conductor: 4 AWG (Split Bolt), 2 AWG (Crimped), Maximum Conductor O.D.: 0.250 - 0.625", 5". For use with 1 kV to 5 kV Non-Shielded Conductors, Rated for cables up to 5 kV.

Category: Non-Shielded Resin Splices

Insulated Submersible Multi-Tap Connector, Two Sided, 3 Port, 2/0 - 14 AWG, 600 Volt, Aluminum With EPDM Rubber Insulation, For Use With Copper or Aluminum Conductors

Category: Connector Blocks - Submersible - Two Sided Wire Entry

Heat Shrink Tubing, Thin Wall, 1/2 Inch, Expanded Inner Diameter 0.500 Inch, Recovered Inner Diameter 0.250 Inch, 2:1 Shrink Ratio, 200 Foot Spool, Flexible Polyolefin, Black

Category: Thin Wall Heat Shrink

Wire Joint, Nylon Insulated, (3) 14 AWG - (4) 12 AWG, White

Category: Crimp Cap Insulators

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Black, Shrink Ratio: 2:1, Size: 3/64", Expanded Insulation Diameter: 0.046", Recovered Insulation Diameter: 0.023", Tube Length: 48". Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Heat Shrink Tubing, 4' Long Stick, 2:1 Shrink Ratio, 3/4", 19.1/9.5 Dia, PO, Clear

Category: Heavy Wall Heat Shrink

Male Disconnect, Insulated, 16 - 14 AWG, Copper With Tin Plating

Category: Female Nylon Insulated Wire Disconnects

Bare Ground Clamp, Direct Burial, Clamp Material: Bronze, Screw Material: Stainless Steel, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 1/2" - 1". *Dottie Part # 28090.* For Use in Grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Bare Wire Ground Clamps

60725-1 TERMINAL 60725-1 6 TNBR SPADE AWG 18-14 ROHS

Category: Male Vinyl Insulated Wire Disconnects

Nimbus Insulated Aluminum In-Line Splicer-Reducer Connector, Conductor Range 750-250, 2 Ports, Tin Plated, UL, CSA

Category: ln-Line Splicers/Reducers - Insulated

Power Distribution Block, Dual Rated, Line Conductor Range 350-6, Load Range 350-6, 1 Port Per Pole Line Side, 1 Port Per Pole Load Side, 3 Pole, UL, CSA

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Female Disconnect, 22-18 AWG, .250 Tab, Nylon Insulated, Red

Category: Female Nylon Insulated Wire Disconnects

BUR YAE14Z3 16-14 FLANGE 6-8

Category: Nylon Insulated Block Fork Terminals

Wire Connector, Color: Yellow, Wire Range: 18 to 12 AWG, Internal Quare Wire Spring, Package of 1000

Category: Color Coded Wire Connectors

RG Series Insulated Ring Terminal, 2 AWG, 2.15 IN, Brazed/Overlapped Seam Barrel, Copper, Red

Category: Nylon Insulated Ring Tongues

Terminal Block, Panel Mount, Dovetail, High Temp, 1P, 45A, Black

Category: Terminal Strips

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 8 AWG - 4 AWG, Motor Lead Range: 10 AWG - 4 AWG. Voltage Range: 1000V, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Compression Lug, Blank Tongue, Long Barrel, Copper, 2/0 AWG

Category: Blank Tongue Copper Compression Lugs

Compression Lug, Heavy Duty, 1-Hole, Short Barrel, 2/0 AWG, 1/2 Inch Stud, Copper

Category: 1-Hole Copper Compression Lugs