Connectors, Crimps, & Termination

Insulated Cable Connector, Single Sided Entry, Two Port, 10 AWG -250 MCM, AL/CU Rated, Aluminum Body, Black

Category: Single Sided Entry Wire Connector Blocks

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 8 AWG - 1/0 AWG, Shrink Ratio: 3:1, Insulation Diameter Range: 0.20" - 0.80", Relaxed Tube Length: 9". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Multi-Tap Connector, Aluminum, Insulated, 8 Port, 2 Sided Entry, 4 AWG to 600 MCM, 600 Volt, AL/CU Rated.

Category: Dual Sided Entry Wire Connector Blocks

Heavy Duty 1 Cable Parallel Ground Connector for 3/8in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

Category: U-Bolt Ground Clamps

Enclosed Power Distribution Block, 1-Pole, 1 Opening (Line Side), 4 Opening (Load Side), 115 Amp, Aluminum

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Copper Beam Grounding Clamp for Wire Range 14 - 6 Copper for grounding trailer frames, cable trays, CATV and telephone pedestals, Slotted Head Screw

Category: Bare Wire Ground Clamps

Fork Terminal, Nylon Insulated, 16 to 14 AWG, Stud Size: #8, Blue, 100 Pack

Category: Nylon Insulated Standard Fork Terminals

Crimp Connector, Insulated, 10 - 16 AWG, Copper Body/Nylon Insulated

Category: Insulated Copper Crimp Connectors

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 3/0 AWG, 3/8 Inch Bolt Hole, 600 Volt to 35kV, Coded Ruby, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 300 MCM, 1/2 Inch Bolt Hole, 1-3/4 Inch Hole Spacing, Coded White, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Long Barrel Copper Compression Lugs

Compression Buttsplice, Copper, Tin Plated, 3 AWG, Long Barrel, 2.8 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 volts to 35 kV, Color Code White

Category: Long Barrel Copper Compression Sleeves

Compression Lug, Copper, 2 Hole without Inspection Window, 1 AWG, 1/2" Stud, 1-3/4" Stud Hole Spacing, Long Barrel, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Harger, 1/4 x 4 x 12", Ground Bar With Wall Mounting Brackets and Insulators, "J" Hole Pattern, Copper Ground Bar, Each

Category: Bus Bars

Compression Lug with Sight Hole, 4 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Gray, Die Code 29, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

Insulated Ferrule, Single Wire DIN End Sleeve, 20 AWG, White, 15/32" Wire Strip Length, .09" Max Wire Insulation, Pack of 500

Category: Single Insulated Ferrules

Compression Lug, Copper, 2 Hole without Inspection Window, 6 AWG, 3/8" Stud, 3/8" Stud Hole Spacing, Long Barrel, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Wire End Ferrule, 1.5mm², 16 AWG Color Coded Red, 12mm Stripping Length

Category: Single Insulated Ferrules

Common earthing point for multiple electrical panels and devices. Includes busbar, insulators and brackets. Busbar has a CC hole pattern.

Category: Bus Bars

Compression Lug, Straight, 2-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 250 MCM, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Red, No Inspection Window

Category: 2-Hole Aluminum Compression Lugs

Bare Ground Clamp, Direct Burial, Clamp Material: Bronze, Screw Material: Stainless Steel, Wire Size: 8-4/0 AWG, Pipe/Rebar Size: 3/8 Inch to 1 Inch.

Category: Bare Wire Ground Clamps

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 1 AWG - 250 KCMIL, Length: 1-1/2 IN, Size: 1 IN, Cast Bronze, Screws: Brass, 2-3/16 IN Height, Dimension B: 2-1/8 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Appli

Category: Ground Clamps With Hub

Enclosed Power Distribution Block, Aluminum Connector Material, 1-Pole, 4 Openings (Line Side), 1 Opening (Load Side), 200 Amp, Aluminum

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Aluminum Mechanical Lug, Conductor Range 2-14, 1 Port, 1 Hole, 1/4in Bolt Size, Tin Plated, UL, CSA

Category: 1-Conductor Aluminum Mechanical Lugs

Push-In Wire Connector, 6 Ports, 600V, 18 to 12 AWG, Black, Order of 1 Each = 50 Connectors

Category: 6-Port Push-In Wire Connectors