Connectors, Crimps, & Termination

WATB WB-2 POOL FITTING 1-1/2 MALE

Category: Pool Bonding

3/4X8FT COP GRND ROD

Category: Copper Ground Rods

0910801 SLEEVES FOR SOLID COPPER WIRE

Category: Long Barrel Copper Compression Sleeves

TERMINAL BLOCK 6-POLE SHORTING W/COVER

Category: Terminal Strips

Compression Lug, Narrow Tongue, Straight, Standard Barrel, 2-Hole Mount, Copper, Tin Plated, For Flexible Copper Conductors, 373.7 kcmil, 925/24 Locomotive, 1/2 In Bolt Holes, 1-3/4 In Spacing, Coded Blue, Peep Hole

Category: 2-Hole Copper Compression Lugs

Ring Terminal, 14 – 10 AWG, 3/8" stud size, bulk package.

Category: Non-Insulated Ring Tongues

Power Distribution Block, High SCCR, 3-Pole, Line: 8-2/0 AWG, Load: (4) 14-4 Cu, SCCR: 200kA (12-4 AWG), 100kA (14-4 AWG), Max Fuse Size: 175/200A Class CC, G, J, T

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Pipe Ground Clamp, 6 AWG - 250 MCM, 1-1/2 - 2 Inch, Electro-Tin Plated Bronze With Stainless Steel Hardware, Acceptable for Direct Burial

Category: U-Bolt Ground Clamps

Heat Shrink, 1/16 Inch, Thin Wall, 4 Foot, Black, 600 Volt, Color: White, Shrink Ratio: 2:1, Size: 1/16 Inch, Expanded Insulation Diameter: .063 Inch, Recovered Insulation Diameter: .031 Inch, Tube Length: 4 Foot Piece.

Category: Thin Wall Heat Shrink

Cable to Cable, Lapped Horizontal X, Type: XB, Cable Run Size: 4/0 AWG, Cable Tap Size: 4/0 AWG, Welding Material: 250.

Category: Horizontal Splice - Lapped - Type X

PVC Clear Heat Shrink Tubing, 4/0-300 Code, 1/0-4/0 Flex, 600 V, Fire Retardant

Category: Thin Wall Heat Shrink

Pipe Ground Clamp, 6 AWG - 250 MCM, 3-1/2 - 4 Inch, Electro-Tin Plated Bronze With Stainless Steel Hardware, Acceptable for Direct Burial.

Category: U-Bolt Ground Clamps

1-Hole Compression Lug, 2 AWG Class B, C, G, H, I, K, M and DLO Copper, Die Code P33, 3/8 IN Stud

Category: 1-Hole Copper Compression Lugs

Cable to Vertical Steel Surface, Type: VS, Surface: Flat Surface, Conductor Size: 4/0 AWG, Welding Material: 115.

Category: Cable to Vertical Steel - 45° Down

Compression Lug, Copper, 1-Hole, Flex, 2/0 AWG Wire, 3/8 Inch Stud Hole., 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

Standard Wire Connector, Yellow, Easy Twist, 22-10 AWG, Bag Of 500

Category: Color Coded Wire Connectors

Power Distribution Block, 1-Pole, Line: 6 AWG - 350 kcmil Cu/Al; Load: (1) 14-1/0 Cu/Al, (14) 14-10 Cu, 10 Al

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Cable to Cable, Horizontal Tee, Type: TA, Cable Run Size: 2/0 AWG, Cable Tap Size: 2/0 AWG, Welding Material: 90.

Category: Horizontal Tees

Stamped Bolted Parallel Cable Connector for positive bolt tension cable clamping. This aluminum Parallel Cable Connector is suitable for Class 1 - Class 2 (4/0 Max) conductor sizes, UL.

Category: Tower Ground Clamps

Aluminum Two-Hole Lug, Long Barrel, Blind End, Max 35kV, 250 kcmil Wire, 1/2 Inch Bolt Size, 1-3/4 Inch Hole Spacing, Tin Plated, Die Code 71H, Die Color Code Red

Category: 1-Hole Long Barrel Aluminum Compression Lugs

Cold Shrink QT-III Termination Kit, 5 - 35 kV, 1 AWG - 500 MCM, Cable Range 0.720 - 1.290 Inch Cable Range, For Use With Tape/Wire/UniShield Shielding, Indoor, Includes (3) Termination Lugs and Stainless Steel Hardware, Silicone Rubber

Category: Medium Voltage Cold Shrink Splice Kits

Mechanical Grounding Connector, 300 to 500 MCM, 1/2 Inch Stud, One Cable to 1/4 Inch Thick Bar

Category: Tower Ground Clamps

Plus ignitor with improved ease of use, new safety features, can use AA or rechargeable batteries. 4.5 m Cable.

Category: Welding Ignitor Control Units

Bi-metallic connector used to make connections between copper and aluminum cables in a straight run. The Bi-Metallic Cable Connector is comprised of Aluminum, Brass, and Stainless Steel304, and has a 1 IN (25.4mm) diameter.

Category: Splices - Insulation Piercing