Connectors, Crimps, & Termination

15KV 200A LB ELBOW W- GROUNDING KIT

Category: Loadbreak Elbows

BUR YFD365 H-CRIMPIT

Category: H-Tap Press-On Lugs

CAD HDTAC2G2G MOLD CABLE HORZ

Category: Horizontal Tees

THB NW14-12 NON-INS HITEMP RI

Category: Non-Insulated Ring Tongues

POWER DISTRIBUTION BLOCK LINERGY 1 POLE 2 LINE 8 LOAD 760A CU 620A AL 600V

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

INSUL-TAP CONN 600-6 IN LINE SPLICER BGGED

Category: ln-Line Splicers/Reducers - Insulated

HARGER HLP344OP ROD-4/0 MOLD

Category: Cable to Ground Bar - Vertical Parallel

POWER DISTRIBUTION BLOCK LINERGY 2 POLE 1 LINE 1 LOAD 175A CU 135A AL 600V

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

COMP GROUNDING CONDUCT TO ROD

Category: Grounding Grid Connectors

Mold,cable To Bus/lug,horz Tee Cable Tap

Category: Cable to Lug or Busbar

WEI 9019140000 H 1.5/18 DSW

Category: Single Insulated Ferrules

Erc Tac2q1y Mold Cable Horz T

Category: Horizontal Tees

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Cable to Ground Rod or Other Rounds, GY, Copper-bonded, 0.75" dia, 3/0 Concentric

Category: Cable to Ground Bar - Lapped - Type X

1/0 2-HOLE LONG BARREL LUG

Category: 2-Hole Copper Compression Lugs

HLP CT24/0 HEAVY DUTY C-TAP

Category: C-Tap Press-On Lugs

CAD PCC2C1L MOLD CABLE HORZ T

Category: Parallel Horizontal Tees

CAD PTC2V2Q MOLD CABLE HORZ T

Category: Parallel Horizontal Tees

NSI NPDB-26-350-1 PDB 1 POLE,

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

CAD GYR182C MOLD CABLE TO GRD

Category: Cable to Ground Bar - Lapped - Type X

BUR YCA322N 400 CU 2 HOLE LUG NEMA

Category: 2-Hole Copper Compression Lugs

OZ-Gedney Type G Universal Ground Clamp, Length: 14-13/16 IN, Size: 12 IN, Malleable Iron, Bolts And Nuts: Steel, Finish: Hot Dip Galvanized, Bolts And Nuts: Hot Dip Or Mechanically Galvanized, 16 IN Height, 7/8 IN Thick, Ground Pipe Size OD: 12 - 13.5 IN, 5/16 IN U-Bolt, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.18, Federal Specification W-F-406E, For Connecting Grounding Conductors To Cold Water Ground Pipe

Category: U-Bolt Ground Clamps

CTW 40167-001 BLOCK, TERM., GROUND,

Category: Aluminum Lay-In Lugs

10 VERT ENHANCED GRD ROD

Category: Copper Ground Rods