Connectors, Crimps, & Termination

Heat Shrink Tubing, Type HSC-FR, 1.0 - 2.0 Inch Diameter, 800 - 1000 MCM, 500 - 750 Flex, 25 Foot Roll, Fire Retardant, Clear, PVC

Category: Thin Wall Heat Shrink

Ring Terminal, Vinyl Insulated, 22 - 18 AWG, Funnel Entry, Plastic Insulation Crimp, #6 Stud Size

Category: Vinyl Insulated Ring Tongues

THB CPO1000-4-A HTSHK THIN WA

Category: Thin Wall Heat Shrink

THB REV717 INS VINYL RING TER

Category: Vinyl Insulated Ring Tongues

Ring Terminal, Vinyl Insulated, Heavy Duty, Funnel Entry, 16 to 14 AWG, 1/4 Inch Stud Size, 600 Volt, Color: Green, Material/Finish: Copper/Tin Plated, Package of 50 Each.

Category: Nylon Insulated Ring Tongues

THB RA2217-170 LOCKING SPADE

Category: Vinyl Insulated Locking Fork Terminals

THB RG757 INS NYL RING TERM 2

Category: Nylon Insulated Ring Tongues

Ring Terminal, Nylon Insulated, 18 - 14 AWG, 1/2" Bolt Hole, Blue, 1000/PK

Category: Vinyl Insulated Ring Tongues

Compression Terminal, 350 kcmil, Copper, One Hole, 1/2 Stud Size, Long Barrel, Bell End, Tin Plated, UL/CSA, 90°C, Up to 35kV, Blue Color Code, 19 Die Index

Category: 1-Hole Copper Compression Lugs

Compression Lug, 1-Hole, Short Barrel, 1/0 Flex, 1/2" Stud Size, Heavy Duty

Category: 1-Hole Copper Compression Lugs

Compression Terminal, 500 kcmil, Copper, Two Hole, 1/2 Stud Size, 1-1/4 Hole Spacing, Standard Barrel, Inspection Window, Internal Chamfer, Tin Plated

Category: 2-Hole Copper Compression Lugs

Service Entrance Sleeve, Aluminum, 1/0 AWG, CU/AL & ASCR Rated, 1/0, #1ACSR,1/0 Str. AL,1-19 Str.,1/0 Str. CU(bbl A), 1/0, #1ACSR,1/0 Str. AL,1-19 Str.,1/0 Str. CU(bbl B), bbl A:Yellow bbl B:Yellow, BG or 5/8 Index

Category: Standard Barrel Aluminum Compression Sleeves

Compression Lug, 1-Hole, 2 AWG, 3/8 Inch Stud, Material: Copper

Category: 1-Hole Copper Compression Lugs

Locktite Copper One-Hole Lug for Conductor Range 300-500 kcmil

Category: 1-Conductor Copper Mechanical Lugs

T & B 71015 #1-250mcm Lug

Category: 1-Conductor Copper Mechanical Lugs

Nsi Pt3/0 Bi Metallic Pin Ter

Category: Copper Pigtail Adapters

3M Tubing BBI-A is made of specially formulated, cross-linked, flame-retardant, track-resistant polyolefin that will shrink to fit rectangular, square or round bus bars.

Category: Bus Bar Heat Shrink Tubing

WEI 9021950000 TOOL H 1.0/14D RED BD

Category: Single Insulated Ferrules

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

HEAT SHRINK THIN WALL 1/8X6 10 PER PACK

Category: Thin Wall Heat Shrink

MMM MW-1-48"-BLACK-5 PCS 1 2.

Category: Adhesive Lined Heat Shrink

Permaground Copper U-Bolt Ground Clamp, Conductor Range 4-8 Sol, Pipe Size 3/8in, Ground Rod Sizes 5/8 to 3/4in, Rebar Size #6, UL, CSA

Category: U-Bolt Ground Clamps

THB 54862BEPH CU TP 2HL LUG L

Category: 2-Hole Long Barrel Copper Compression Lugs

Heat Shrink Tubing, 1/8-48"-Red-250 Pcs.

Category: Thin Wall Heat Shrink