Connectors, Crimps, & Termination

Compression Lug, Straight, Long Barrel, 1-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 4 AWG, 1/2 Inch Bolt Hole, Coded Gray, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Long Barrel Copper Compression Lugs

Butt Connector, 6 - 5 AWG, Pack of 200

Category: Non-Insulated Butt Connectors

Grounding Strap, Braided, Bulletin A80 (accessories - Misc.), Size: 4 AWG x 16 Inch, Material: Copper

Category: Bonding Connectors

Power Distribution Block, Linergy, 3-Pole, 175 Amp CU, 600 Volt AC, 1 Line Side Lug, 4 Load Side Lug

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Wire End Ferrule, 1.5mm², 16 AWG, Color Coded Red, 12mm Stripping Length, Order of 1 = Pack of 500 Ferrules

Category: Single Insulated Ferrules

CRSM Heat-Shrinkable Halogen-Free Wraparound System for Cable Repair, Length 1200 Feet

Category: Heat Shrink Repair Kits

Butt Connector, Nylon-Insulated, 16 - 14 AWG, Blue, 100 Pack

Category: Nylon Insulated Butt Connectors

Mechanical Lug, 2 Conductor, 2/0 - 14 AWG, Aluminum With Tin Plating, Dual Rated For Use With Copper/Aluminum Conductors

Category: 2-Conductor Aluminum Mechanical Lugs

F20 welding material is primarily used for grounding and bonding applications. It is poured into the mold and ignited with a flint ignitor. Contains approx 45 grams of weld metal and small quantity of starting material.

Category: Traditional Welding Material

Copper Compression Lug with Sight Hole, Conductor Size: 2 AWG, 1-Hole Stud, Stud Diameter: 1/4". Color-Keyed: Brown, Die Code: 33.

Category: 1-Hole Copper Compression Lugs

Compression Terminal, 600 kcmil, Copper, One Hole, 1/2 Stud Size, Long Barrel, Internal Chamfer, Tin Plated

Category: 1-Hole Long Barrel Copper Compression Lugs

Female Disconnect, Vinyl Insulated, 12 - 10 AWG, .25 Inch x .032 Inch Tab, Yellow, Pack of 75

Category: Multi-Stack Vinyl Insulated Wire Disconnects

Ring Terminal, Vinyl Insulated, Funnel Entry, 12 - 10 AWG, 5/16 Inch Stud Size, 600 Volt, Yellow, Package of 50 Each

Category: Vinyl Insulated Ring Tongues

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range: 6 AWG - 4 AWG, Insulation Diameter Range: 0.31" - 0.56", Relaxed Tube Length: 6.0". For use with all Solid Dielectirc (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

Compression Butt Splice, Long Barrel, Wire: 250 MCM, Material/Finish: Copper/Tin Plated

Category: Long Barrel Copper Compression Sleeves

Split Bolt, 2 Wire, 2 AWG, Copper

Category: Copper Alloy Split Bolts

Ring Tongues, Nylon-Insulated, Wire Range: 12 - 10, Stud Size: 5/16, Color: Yellow, 50/PK

Category: Nylon Insulated Ring Tongues

CSA CPX10011/2CLR48

Category: Thin Wall Heat Shrink

Multi-Tap Connector, Aluminum, Insulated, 4 Port, 1 Sided Entry, 14 AWG to 2/0 AWG, 600 Volt, AL/CU Rated

Category: Single Sided Entry Wire Connector Blocks

Ground Rod Clamp, Heavy Duty, 1/2 Inch, 10 AWG to 2 AWG, Copper Alloy, Hex Head Bolt, Suitable for Direct Burial

Category: Ground Rod Ground Clamps

Power Distribution Block, 3 Pole, 335 Amp, 600 Volt AC, 1 Main/4 Branch, Thermoplastic Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

BICSI & ANSI/TIA Secondary Bonding Busbar, 12" Width SBB, 2" Height, 12" Width, 1/4" Depth

Category: Bus Bars

Mechanical Splicer/Reducer, Aluminum - Tin Plated, Dual Rated for Copper or Aluminum Conductors, 3/0 AWG to 500 MCM, (4) 3/8 Hex Socket Screws

Category: Aluminum Splice Reducing Lugs

Ring Terminal, Vinyl Insulated, 12 to 10 AWG, 1/4 Inch Stud Size, 600 Volt, Yellow, Package of 25 EA

Category: Vinyl Insulated Ring Tongues