Search results

Conduit Hub With Thermoplastic Insulated Throat, Sealing Ring Nitrile, 1 IN, Use With Rigid/IMC Conduit, Zinc

Category: Die Cast Zinc Conduit Hubs

Conduit Hub With Thermoplastic Insulated Throat, Sealing Ring Nitrile, 2 IN, Use With Rigid/IMC Conduit, Zinc

Category: Die Cast Zinc Conduit Hubs

One Piece Strut Clamp, With Back Plate. 2" EMT; 1-1/2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 50.

Category: Strut Channel One Piece Pipe Clamps

Liquidtight Connector, 2 Inch, Straight, Bullet Type, Non-Metallic, Black, For Use With Type B Liquidtight Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Big beam clamp. For 3/8-16 threaded rod or 3/8" - 16 bolts to beam flange through 3/4". Static Load: 200 lbs. Standard Packaging Quantity: 25.

Category: Beam Clamps - Adjustable

J-Hook With Rod/Wire Clip, 3/4 Inch, Accommodates 1/4 Inch Rod, #12 - 18 Wire Size, Steel With Pregalvanized Finish

Category: J-Hook From Wire/Rod & Beam

Liquidtight Connector, 45°, 1/2 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Thread Install Rod Hanger With Anglet Bracket, 1/4", Steel/Pregalvanized

Category: Rod & Wire Hangers

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 1/2-5/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

Anti-Rattle Stud Support- Conduit up to 1", Material: Steel, Standard Packaging Quantity: 100.

Category: NM-B NMC & MC/AC Cable Support For Studs

One Piece Strut Clamp, With Back Plate. 1-1/2" EMT; 1-1/4" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 50.

Category: Strut Channel One Piece Pipe Clamps

1-1/2" EMT or 1-1/4" RIGID Conduit Clamp with retained bolt and built-in nut; 1/4" mounting hole. Load Limit: 250lbs. Standard Packaging Quantity: 100

Category: Conduit Clamps

Rooftop Pipe Support, 4" Pier, Supports 50 Pound Loads

Category: Pyramid Pipe & Equipment Supports

Liquidtight Connector, Straight, 1-1/2 Inch, Steel, For Use With Metallic Liquidtight Conduit

Category: Straight Steel Liquidtight Flex Connectors

Box Hanger, Snap On Fixture, Acoustical Ceiling, 8 Inch Height Adjustable, 24 Inch Span, Steel

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

Independent Support Clip for Acoustical Tee Bar 1/4-20 x 5/8 Inch Long Stud, Load Limit 65 Pounds, For Use With 5/16 Inch Diameter Grid, Standard Packaging Quantity: 100 Each.

Category: Acoustical T-Grid Ceiling Independent Support Clips

MC Connector, Saddle Type, 3/8 Inch, Zinc Die Cast, For Use With Metal Clad Cable

Category: Single Barrel Saddlegrip MC / AC Connectors

Liquidtight Connector, 1/2 Inch, Straight, Material: Thermoplastic

Category: Straight Non-Metallic Liquidtight Flex Connectors

Liquidtight Connector, 45°, 3/4 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

MC/AC cable support spacer for up to 9 runs - Nominal outside diameters from .430 thru .560 Standard Package Quantity: 50.

Category: MC/AC Cable to Wire/Rod & Beam

Liquidtight Sealing Gasket, 1 Inch, Steel Retainer, Santoprene Rubber Seal

Category: Liquidtight Connectors - Accessories

Conduit Locknut, 1 Inch Diameter, Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Hammer-On Flange Clip for 1/8"-1/4" flange. Standard Packaging Quantity: 100

Category: Flange Clips

1/2", Snap-In Bushing, Non-Metallic, Package Quantity: 100. For use with all Knockouts.

Category: Knockout Bushings