Search results

Liquidtight Connector, 45°, 1-1/4", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Reducing Bushing, Threaded, Malleable, 1" x 3/4"

Category: Iron Alloy Reducing Bushings

Conduit Clamp, 1 Inch, Type: UPC-G, Parallel, Malleable Iron, For Use With Rigid/EMT/IMC Conduit

Category: Malleable Iron EMT Parallel Type K-Clamps

OZ-Gedney BS-S Series Domed Top Design Cover, 3-1/2 - 4 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Malleable Iron Conduit Body Opening

Category: Steel Conduit Body Covers

OZ-Gedney Type 14-G Pipe Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/2 IN Mounting Hole Width, 1 Holes, 1-1/8 IN Width, Length: 5-1/16 IN, 2-9/16 IN Height, Trade Size: 2 IN, Third Party Certification: CSA 009795, Applicable Third Party S

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 4-1/8 IN Width, 3 IN Height, Third Party Certification: UL

Category: Malleable Iron Liquidtight Flex Connectors

Grounding Liquidtight Connector, 3/4 in, 90°, Insulated Throat, Malleable Iron, Zinc Plated.

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Right Angle Clamp, 1/2 inch, Material: Material: Steel, Finish: Hot-Dipped Galvanized.

Category: Malleable Iron EMT Right Angle Type K-Clamps

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1-1/4 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 3/4 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Li

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 3-1/2 - 4 IN, Closed-Cell Neoprene, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2 IN Body Diameter X 5-1/2 IN Overall Length, 2-1/4 IN Turning Radius, 9 OZ Sealing Compound Required, 1/2 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, CSA 009795 Suitable For Wet Locations, UL Listed Using: O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, CSA Certified Sealing Compound, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30 NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1-1/4 IN, 2-1/8 IN Outside Diameter, Connection: MNPS, 7/8 IN Thread Length, Flange Thickness: 1/4 IN, Third Party Certification: UL File Number E-11853,

Category: Iron Chase Nipples

Conduit Bushing, Insulating, 3 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Capped Bushing, 3/4 Inch, Insulating, Malleable Iron/Zinc, Threadless, For Use With Rigid/IMC Conduit

Category: Capped Bushings

Conduit Body, Type LB, 3 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LB Iron Conduit Bodies

Conduit Body, Type LB, 2-1/2 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LB Iron Conduit Bodies

Conduit Body, Type LL, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LL Iron Conduit Bodies

Conduit Body, Type C, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

Conduit Body, Type T, 1-1/2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type T Iron Conduit Bodies

Conduit Body, Type C, 2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type C Iron Conduit Bodies

Conduit Body With Cover and Gasket, Type C, 2" Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 3/4 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 1/2 IN, 1/2 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Liste

Category: Explosion-Proof Recessed Head Close-Up Plugs

Oz-g 970 3-1/2+4 Cond Bodycvr

Category: Steel Conduit Body Covers

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 6-1/4 IN Overall Length, 3-5/8 IN Turning Radius, 15 OZ Sealing Compound Required, 1 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings