Search results

Conduit Bushing, Insulating, 1/2 Inch, Threaded, Copper Free Aluminum, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Oz-g Acv-50t 1/2 90d Ins 2- scr Conn

Category: 90 Degree Two Screw Squeeze Flex Connectors

Armored Cable/Flexible Conduit Connector, Type Straight, Trade Size 3/8 Inch, Knockout Size 1/2 Inch, Cable Opening Single, Cable/Conduit Type Armored Cable/Flexible Conduit, Cord Size 27/64 to 5/8 Inch, Length 9/16 Inch, Installation (1) Set Screw, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Includes Locknut, Used On Armored Cable/Flexible Metal Conduit, Applicable Standard Federal Specification W-F-406E, NEMA FB-1

Category: Straight Squeeze Flex Connectors

Armored/Metal Clad Cable Terminator, Trade Size 1-1/2 Inch, Cable Type Jacketed Metal Clad Cable, Cable Size 1.73 to 2 Inch, Diameter 3-1/8 Inch, Length 4 Inch, Material Zinc Plated Malleable Iron/Ductile Iron, Application Wet Location, Approval UL 514B, CSA C22.2, Applicable Standard W-F-406B, Cable Core Diameter 1.61 Inch

Category: Single Barrel MC / AC Connectors

3/4 In Str Conn Lfmc Galv

Category: Malleable Iron Liquidtight Flex Connectors

OZG PLG250CA 2-1/2" AL CLOSE-

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney BC-G Series Flat Top Design Cover, 3-1/2 - 4 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards:

Category: Iron Conduit Body Covers

OZ-Gedney Type 300R Hex Reducing Bushing, Size: 2 X 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded, 2-3/4 IN Width Across Corners, 15/16 IN Thread Length, Flange Thickness: 5/16 IN, Third Party Certification: UL File Numb

Category: Iron Alloy Reducing Bushings

OZG REC-2007 RDC CP MI 2 TO 3

Category: Explosion-Proof Threaded Bell Reducing Couplings

OZG OZG570IG 1-1/2 FM 7 CVR &

Category: Steel Conduit Body Covers With Gaskets

Conduit Body, Type LR, 1-1/2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LR Iron Conduit Bodies

Oz-g Tb200 2-in Mall Tb Cond body

Category: Type TB Iron Conduit Bodies

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-5/16 IN, 1/4 IN Mounting Hole Width, 1 Holes, 1/4 IN Width, Trade Size: 3/4 IN, Dimension A: 2-9/16 IN, Applicable Third Party Standards: Federal Specification FF-S-7

Category: Steel 1-Hole Conduit Straps

Conduit Body, Type: TB, Size: 1 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type TB Iron Conduit Bodies

Grounding Bushing, Insulated, Threaded, 2-1/2 Inch, Set-Screw Connection Type, Rated 150° Celsius, Malleable Iron/Zinc Bushing, Copper Lay-In Lug 14 - 4 AWG, Phenolic Insulator, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Grounding Bushing, Insulated, Threaded, 3 Inch, Set-Screw Connection Type, Rated 150° Celsius, Malleable Iron/Zinc Bushing, Copper Lay-In Lug 8 - 2/0 AWG, Phenolic Insulator, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type LL Conduit Body, Cover And Gasket Assembly, 1-1/4 IN Hub, Length: 7-7/8 IN, 2-5/8 IN Height, Conduit Body: Die-Cast, Copper-Free Aluminum, Cover: Type BS Aluminum, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 34 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LL Aluminum Conduit Bodies

OZ-Gedney Type LR Conduit Body, 1-1/4 IN Hub, Length: 8-1/4 IN, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL File Nu

Category: Type LR Iron Conduit Bodies

Cord Grip Connector, 1/2 Inch, Straight, Strain Relief, Cord Range: 0.312 to 0.375 Inch, Aluminum

Category: Straight Aluminum Cord Grips

OZ-Gedney Clip-On 170 Series Cover, 1 IN Hub, Form: 7, Screw-In Mounting, Iron Body, Stainless Steel Screws, Zinc Electroplated Clips, Finish: Zinc Electroplated, Gray, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, For Form 7 Conduit Bodies

Category: Iron Conduit Body Covers

OZ-Gedney Type PG Armored/Metal Clad Cable Connector, Size: 3/4 IN, Conductor Range: 1.03 - 1.21 IN, Malleable Or Ductile Iron, Finish: Zinc Plated, 9/16 IN Thread Length, Dimensions: 1-15/16 IN Maximum Diameter X 2-5/8 IN Length, 0.85 IN Cable Core Diameter, Dimension B: 2-5/8 IN, Third Party Certification: UL File Number E-36853, CSA 15553, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406B, For Jacketed Metal Clad Cable Such As Interlocked Armor, Corrugated Metal Sheath, Smooth Aluminum Sheath And Similar Types

Category: Stainless Steel Cable Glands

OZ-Gedney Type ICC Phenolic Insulating Coupling, Trade Size: 2 IN, 2-3/4 IN Outside Diameter, Length: 2-1/8 IN, Flexibility: RMC And IMC, Canvas Base Phenolic, Connection: Threaded, Black, For Rigid Conduit And IMC

Category: Bakelite / Phenolic Rigid Conduit Couplings

OZ-Gedney Type C Conduit Body, 3/4 IN Hub, Length: 5-5/8 IN, 1-1/2 IN Width, 1-5/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (6 AWG) Conductors, 7.1 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Iron Conduit Bodies

Conduit Body Cover, Aluminum, 2

Category: Aluminum Conduit Body Covers