Search results

NM Cable Connector, Push-In, Plastic, 3/4" KO Size. Install From Inside or Outside the Box.

Category: Non-Metallic NM Cable Connectors

Rigid Strut Strap, 1 Inch Diameter, Pre-Assmebled, Stainless Steel 316 Hardware, Aluminum, For Use With Rigid/IMC Conduit

Category: Conduit Strut Strap - Aluminum

Conduit Bushing, Insulating, 1-1/4 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

One Piece Strut Clamp. 1" EMT; 3/4" Rigid. Static Load Limit: 200 lbs. Standard Packaging Quality: 100.

Category: Strut Channel One Piece Pipe Clamps

1 Inch Pipe Strap, Aluminum, for Use with Rigid/IMC Conduit

Category: Aluminum 1-Hole Conduit Straps

MC/AC cable support spacer for up to 4 runs - Nominal outside diameters from 0.0560 - 0.690 Standard Package Quantity: 50.

Category: MC/AC Cable to Wire/Rod & Beam

Post Base, 2-Hole Bottom Plate - Electro-Galvanized Finish (EG) - Use with PS 200, 210 Bolt Hole Diameter 9/16"

Category: Post Base Strut Channel Connectors

3/4" Strap, 1-Hole, Material: Steel. For use with: EMT.

Category: Steel 1-Hole Conduit Straps

One Piece Strut Clamp, With Back Plate. -- EMT; 2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 25.

Category: Strut Channel One Piece Pipe Clamps

Chase Nipple, 2-1/2 Inch, Insulated, Steel, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Iron Chase Nipples

2-1/2 Inch, Insulated Ground Bushing, Threaded Type:, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 2/0 AWG (Stranded). For Copper or Aluminum Grounding.

Category: Threaded Ground Bushings

Hammer on Flange Clip / Pipe Sleeve Positioner. Load limit: 200 lbs. Standard Packaging Quantity: 100.

Category: Flange Clips

Four Hole Corner Angle - Electro-Galvanized Finish (EG)

Category: 90 Degree Strut Channel Corner Connectors

Three-Piece Coupling, 1-1/2", Threaded, Malleable Iron/Zinc, For Use With Rigid/IMC Conduit

Category: Iron Rigid Conduit Three Piece Couplings

Through Stud Cable/ Conduit Support for 1/2 Inch or 3/4 Inch Conduit, Steel, Standard Packaging Quantity: 100 Each.

Category: Through Stud Cable/Conduit Supports

Rigid Strut Strap, 3 Inch Diameter, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

Flange-Mount conduit clips (snap-close). 3/8" MC/AC cable to 1/8" to 1/4" flanges. Load limit: 75 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

Bushed Nipple, Material: Malleable Iron, Finish: Zinc Plated, Length: 0.94 IN, Trade Size: 1-1/4 IN, Outside Diameter: 2.13 IN, Flexibility: Rigid And IMC, Connection: Male Threaded, Thread Length: 0.69 IN, Standard: UL 514B, UL File Numbe

Category: Iron Chase Nipples

Sealing Fitting, Vertical/Horizontal, 2 Inch, Female, 25% Fill, Malleable Iron, For Use With Rigid/IMC Conduit in Close Turing Radius.

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Liquidtight Connector, 1-1/2 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Open Angle Connector, 45°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: Steel. Finish: Electro Plated Zinc.

Category: Open Angle Strut Channel Connectors

J-Hook With Multi-Function Clip, 1 Inch, Steel/Pre-Galvanized, Provides Optimal Support For High-Performance Data Cable, Up To and Including CAT 5E, Cat 6, Cat 6A, Cat 7, and Fiber-Optic Cable

Category: J-Hook From Wire/Rod & Beam

Liquidtight Connector, 1/2 inch, 45°, Insulated Throat, Zinc Electroplated Steel

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Elbow, 90 Degree, 3/4 Inch, Female, Explosion-Proof and Dust-Ignitionproof, Malleable Iron

Category: Explosion-Proof 90 Degree Female Elbows