"14/2 nm-b"

PVC Coated Ground Hub, Insulated, Size: 1-1/2 Inch, Material/Finish: Zinc/PVC Coated

Category: PVC Coated Conduit Hubs with Ground

MALE ELBOW

Category: Plumbing Pipe Unions

Bushing, Type: Snap-In, Diameter: 3.50 Inch, Non-Metallic, Black

Category: Knockout Bushings

1/2X4-SS-304-NPL

Category: Pre-Cut Plumbing Pipe Nipples

Flange- Mount Conduit Clip (Push-in)- SM. 1" conduit 1/8" to 1/4" flanges. Load Limit: 15 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

APP 20T30505 T3CDS CABLE GLAN

Category: Brass Cable Glands

Conduit Body Cover, Material: Die Cast Aluminum, 2", For Threaded and Set Screw Conduit Bodies

Category: Aluminum Conduit Body Covers

S-613 1-1/4IN/1-1/2IN S-613 SUMP CHECK VALVE WITH STAINLESS STEEL BANDS

Category: Plumbing Pipe Check Valves

Cord Grip Connector, 1", Straight, Cord Range: .875 to 1.00 Inch, Aluminum

Category: Straight Aluminum Cord Grips

Conduit Body, Type: LB, FM8, Size: 3/4 inch, Material: PVC Coated Iron. Includes: Cover & Gasket, Dimension A (Inches): 5.6 Dimension B (Inches): 2.44 Dimension C (Inches): 1.64 Dimension D (Inches): 1.19 Dimension E (Inches): 3.94 Nominal Weight (Pounds): 2

Category: PVC Coated Type LB Conduit Bodies

Conduit Body, Type C, 3/4 Inch Hubs, Form 7, Duraloy 7 Series, Iron Alloy, For Use With Rigid/IMC Conduit

Category: Type C Iron Conduit Bodies

Tray Cable Fitting, 1/2 Inch NPT, Cable Range 0.540 - 0.670 Inch, Copper Free Aluminum, For Use With Non-armoured, Portable, and Tray Cable/Cord

Category: Aluminum Cable Glands

Serrated Washer, 1-1/2 Inch NPT, Stainless Steel

Category: Cable Gland Earth Tags

Rigid Set Screw Coupling, 2", Steel, Concrete Tight, For Use with Rigid/IMC Conduit

Category: Steel Rigid Conduit Set Screw Couplings

Threaded Conduit Nipple, 1-1/2 Inch x 9 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Conduit Body, Type LL, 1/2 Inch, Aluminum, Epoxy Powder Coat Finish, For Use With Rigid/IMC Conduit

Category: Type LL Iron Conduit Bodies

Conduit Body, LR, 1-1/2 Inch, Aluminum, Epoxy Powder Coat Finish, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

CONDUIT HANGER, 0 TRADE, 1/2-IN. RIGID/EMT, WITH BOLT & THREAD

Category: Conduit Clamps

Conduit Cover W/ Stainless Screw, 1-1/4-1-1/2 IN Hub, Use W/ Rigid/Alum Conduit, Stamped Alum, Natural

Category: Aluminum Conduit Body Covers

Cord Grip, Strain Relief, Straight, Size: 1/2 Inch, Cable Range: 0375 - 0.500 Inch, Aluminum

Category: Straight Aluminum Cord Grips

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 1 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-1/2 IN Base Diameter X 2-15/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

Liquidtight Connector, Straight Angle, Size: 2 inch, Material: PVC Coated Steel.

Category: Straight PVC Coated Type LT Connectors

2-1/2 DELUXE GRIP-MALE PG2036 WAS50183

Category: Straight Steel Cord Grips

Conduit Body, Type C, 1-1/2 Inch Diameter, Stainless Steel

Category: Type C Stainless Steel Conduit Bodies