Fittings

Locknut, Type: Bonding, Size: 1-1/4 Inch, Material/Finish: Steel/Zinc

Category: Grounding Conduit Locknuts

ROD & WIRE FASTENER

Category: Conduit Hangers From Wire/Rod & Beam

Threaded Conduit Nipple, 3-1/2 Inch x 8 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Corner Angle Fitting, 90°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: 304 Stainless Steel.

Category: 90 Degree Strut Channel Corner Connectors

Grounding Bushing, 1 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Bronze Lug 14 - 4 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Liquidtight Connector, 1-1/4 Inch, Straight, With Grounding Lug, Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Unistr P1964eg 5/8 Sq Wash

Category: Strut Channel Washers

ProLine Fastener Packages, M20, Steel

Category: Deck & Grating Supports

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.156 - 0.25 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body

Category: Single / Double Weave Strain-Relief Grips

BOX MOUNTING BRACKET FOR 24" STUD SPACING

Category: Prefab Assemblies

EM-M Conduit/Pipe to Flange Clip, Spring Steel, nVent Armour, 1" EMT, 9/16"û3/4" Flange

Category: Flange-Mount Cable/Conduit Clips

UNILETS EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting, Size: 1 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Tapered FNPT, Turning Radius: 2.38 IN, Length: 1-3/4 IN, Width: 1-3/4 IN, Standard: UL 886

Category: Explosion-Proof Female Vertical Sealing Fittings

Rigid Strut Strap, Diameter: 3/4 Inch, Material: Aluminum, Pre-Assembled, For Use With Rigid/IMC Conduit

Category: Strut Channel Aluminum Conduit Clamps

Strut Post Base, Square, Single Strut, 6 x 6 x 3-1/2 Inch, Steel/Hot Dip Galvanized Finish, For Use With B22 Single Strut 1-5/8 x 1-5/8 Inch

Category: Post Base Strut Channel Connectors

Grounding Locknut/Bonding Locknut, Size: 3-1/2 Inch, Material: Zinc Die Cast

Category: Grounding Conduit Locknuts

Chase Nipple, Size: 4 Inch, Insulated, Material: Zinc Die Cast

Category: Steel Chase Nipples

Liquidtight Connector, STF Series, 1-1/4 Inch, Malleable Iron, For Use Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Body Cover, 3-1/2 to 4 Inch Aluminum, for LB-D, LR-D, LL-D, LC and TC Series Conduit Bodies, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Body Covers

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3-1/2 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 5-1/2 IN Maximum Diameter X 2-5/8 IN Length, 1-3/16 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

Rigid Strut Strap, Diameter: 1 Inch, Material: Aluminum, Pre-Assembled, For Use With Rigid/IMC Conduit

Category: Strut Channel Aluminum Conduit Clamps

Conduit Body With Cover and Neoprene Gasket, Type: T, Size: 1-1/4 Inch, Aluminum

Category: Type T Aluminum Conduit Bodies

Liquidtight Grounding Straight Connector, Insulated, Size: 2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Strut Pipe Clamp, 5 Inch, 1-1/4 x 7 x 5.81 Inch, Steel With Electro-Galvanized Finish

Category: Strut Channel Rigid Conduit Clamps

Sealing Fitting, Female, Explosion-Proof/Dust-Ignitionproof, Vertical, 40% Fill, 1 Inch, Aluminum, For Use With Rigid/IMC Conduit

Category: Explosion-Proof Female Vertical Sealing Fittings