Fittings

Chase Nipple, 1/2 Inch, Malleable Iron, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Iron Chase Nipples

Beam Clamp, 1 Inch Wide, Rod 1/4 Inch, Heavy Duty, Steel/Zinc Plated

Category: Type C Iron Conduit Bodies

B-LINE B616-9/16ZN CHANNEL HA

Category: Strut Channel Hangers

Elbow, 45 Degree, Type: C x C Solder, Size: 3/4 Inch, Material: Copper

Category: 45 Degree Plumbing Pipe Elbows

90° Insulated Connectors Die Cast Zinc, 2 In. Trade Size

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

Anti-Short Bushing, Diameter 2 Inch, Material Nylon, For use with Rigid/IMC/EMT Conduit

Category: Anti-Short Bushings

4", Insulated Ground Bushing, Threadless, Set-Screw Type, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.

Category: Threadless Ground Bushings

Cable Gland StarTeck Extreme Series, 3/4 Inch Diameter, 0.860 - 1.205 Inch Cable Range, Copper Free Aluminum

Category: Single Barrel MC / AC Connectors

Knockout Plug, 2 Inch Diameter, Thermoplastic, For Use With Rigid/IMC Conduit

Category: Non-Metallic Knockout Seals

Standard Pipe Clamp, Diameter: 3", Material: Steel, Finish: Zinc Dichromate Gold. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

BlueKote Type T Conduit Body, 3/4 IN Hub, Form 7, 9.1 cu-in, Gray Iron, Zinc Plated/Epoxy Powder Coated

Category: Type T Iron Conduit Bodies

Multi-purpose clip fits beam flange 1/8"-1/2" - Use w/ Bridle Rings, Drive Rings, etc. Load limit: 50 lbs. Standard Packaging Quantity: 100

Category: Flange-Mount Cable/Conduit Clips

2 Inch to 1-1/4 Inch, Reducing Bushing, Steel, For Use with Rigid/IMC Conduit

Category: Steel Reducing Bushings

Cord Connector, Low Profile, Size: 3/4 Inch, Strain Relief, NPT, Cord Range: 0.385 Inch - 0.750 Inch, Material: Non-Metallic.

Category: Straight Low Profile Non-Metallic Cord Grips

Non-Metallic Sheathed Cable Connector, Two Screw, Straight, Knockout 3 Inch, Cable Range 1.150 - 1.980 Inch, Malleable Iron with Zinc Plating

Category: Iron NM Cable Connectors

Non-Metallic Liquidtight Connector, 45°, 1 1/2 Inch, Non-Metallic, For Type B

Category: 45 Degree Non-Metallic Liquidtight Flex Connectors

Liquidtight Connector, 2 Inch, 90°, Insulated Throat, Zinc Electroplated Steel

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Armored Cable and Flexible Metal Conduit 90° Connector, 3/4 Inch, Malleable Iron/Zinc Electroplated.

Category: 90 Degree Single Barrel MC / AC Connectors

Conduit Hub With Thermoplastic Insulated Throat, Sealing Ring Nitrile, 3/4" Diameter, Zinc With Chromate Finish, For Use To Connect Rigid Conduit to a Threadless Opening in a Box or Enclosure

Category: Die Cast Zinc Conduit Hubs

Rigid Set Screw Connector, 3/4 Inch, Steel, Concrete Tight, Insulated, Used on Threadless Rigid Conduit & IMC

Category: Steel Rigid Conduit Set Screw Connectors

Features: Concrete Tight, Male Hub 5/8 In Thread, Application: Threadless Rigidconduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 1.5in, Outside Diameter: 2 375in, Length: 1.75in,material: Malleableiron

Category: Iron Rigid Conduit Set Screw Connectors

Reducing Bushings Iron, 3 In. to 2-1/2 In.

Category: Iron Alloy Reducing Bushings

Strain Relief Cord Grip, 90 Degree, Diameter 3/4 Inch, Cable Range 0.250 - 0.375 Inch, Steel, Color Code Green

Category: 90° Steel Cord Grips

TX Expansion Coupling, 2 Inch Diameter, 4 Inch Movement, 2 Inch Outer Diameter, Steel With Hot Dipped Galvanized Finish, For Use With EMT Conduit

Category: Steel EMT Expansion Fittings