Fittings

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-1/8 IN Width, Size: 1/2 IN, 14 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Standa

Category: Aluminum Conduit Locknuts

Conduit Body With Cover/Gasket, Type LL, 1 Inch, Form 85, Aluminum

Category: Type LL Aluminum Conduit Bodies

Three-Piece Knockout Seal, 2 Inch, Bolt-On, Steel

Category: 3-Piece Knockout Seals

Rigid Conduit Strap, 1-Hole, 1-1/4 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Rigid Strut Strap, Diameter: 1/2 in, Material: Aluminum.

Category: Strut Channel Rigid Conduit Clamps

Corner Angle Fitting, 90°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: 304 Stainless Steel.

Category: 90 Degree Strut Channel Corner Connectors

SPRING NUT, #8-32 THREAD, .150-IN. NUT

Category: Strut Channel Spring Nuts

Threaded Conduit Nipple, 6 Inch x Close, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Locknut, 3/4 Inch Diameter, Non-Metallic, Gray

Category: Non-Metallic Conduit Locknuts

Corner Angle, 4 Holes, Hole Diameter: 9/16 in, 90°, Material: Steel, Finish: Electro Galvanized.

Category: 90 Degree Strut Channel Corner Connectors

OCC T448-4X-G 1 1/4 IN GRAY PVC CTD

Category: PVC Coated Type T Conduit Bodies

OZ-Gedney Clamp Back, Size: 1-1/4 IN, 5/16 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 3-11/16 IN Length X 1-7/16 IN Width, 1/2 IN Hole, Dimension E: 9/16 IN X 17/32 IN, Third Party Certification: CSA 009795, Applicable

Category: Clamp Backs - Iron

Rigid Stainless Steel 316 LL Conduit Body 2" Trade SizeUL Listed UL514A E307133

Category: Type LL Stainless Steel Conduit Bodies

"U" Shape Fitting, 5 Holes, Hole Diameter: 9/16 in, Material: Steel, Finish: Hot Dipped Galvanized.

Category: U-Support Strut Channel Connectors

Hub Size: 1-1/2 Inch NPT, Straight Male Cord Connector, Cord Range: 1.38 Inch - 1.50 Inch, Form Size: F6, Material & Finish: Cast Aluminum.

Category: Straight Aluminum Cord Grips

Conduit Body With Cover/Gasket, Type LL, 3/4 Inch, Form 85, Aluminum

Category: Type LL Aluminum Conduit Bodies

Eaton B-Line series square washer, 1.62" H x 1.62" L x 1.62" W, Steel, Hot-dipped galvanized, 3/8" bolt, Square washer

Category: Strut Channel Washers

Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Snaps into knockout with external spring steel clip. Concrete tight when taped. Supports .710 to .910 cable range with a .620 end stop diameter.

Category: Single Barrel Saddlegrip MC / AC Connectors

Zinc die-cast, single screw duplex connector snaps into 1/2" knockout with an external spring steel clip. Provided with insulated throat. Concrete tight when taped.

Category: Double Barrel MC / AC Connectors

APP TC125DCG 1-1/4 THD ALUM T

Category: Universal Aluminum Conduit Bodies

Eaton B-Line series beam clamps, 2.4375"Hx2.5"Lx0.4670"W, Steel, 1100 load, 1/2"-13 rod size, 1/2”-13 screw size, 0.875"beam width

Category: Beam Clamps - Adjustable

Open Angle Connector, 60°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: Steel. Finish: Electro Plated Zinc.

Category: Open Angle Strut Channel Connectors

Flex Connector, Type: Screw-In, Insulated, 3/8 Inch, Zinc Die Cast, For Use With Flexible Metal Conduit

Category: Screw-In Flex Connectors

Square Washer, Size: 1/2 in, Material: Steel, Finish: Galv-Krom.

Category: Strut Channel Washers