Fittings

TYM CSC050 1/2 IN STAMPED ALU

Category: Aluminum Conduit Body Covers

Ranger™ Cord Connector, Liquidtight, 90°, NPT Hub Size: 1/2 Inch, Cord Range: 0.310 Inch - 0.560 Inch, Material: Malleable Iron.

Category: 90° Malleable Iron Cord Grips

Rigid Strut Strap, 1/2 Inch Diameter, Pre-Assmebled With Stainless Steel 316 Hardware, Aluminum, For Use With Rigid/IMC Conduit

Category: Conduit Strut Strap - Aluminum

TYM COLB100 1 IN COMBO LB ASS

Category: Type LB Aluminum Conduit Bodies

TYM COLB075 3/4 IN COMBO LB A

Category: Type LB Aluminum Conduit Bodies

PVC Coupling, Type: Expansion, Size: 4 Inch, Material: Non-Metallic

Category: PVC Expansion Couplings

PVC Coated Explosion and Dust-Ignition Proof UNY Male Union, Pipe Size 1-1/2 Inch/41 Metric, 3 Piece, for Hazardous and Non-hazardous Locations, Overall Length 3.63 Inch/92.20 Millimeters, Overall Diameter 3.06 Inch/77.72 Millimeters, Electrogalvanized Steel, Gray

Category: PVC Coated Female-Male Unions

1 Inch Sealing IP Washer, NPT, Material: Nylon, Box Quantity: 50. For Use With Cable Glands.

Category: Cable Gland Entry Thread Seals

Kwik Washer, For Use With ANY channel, Size: 1/4 in, Material: Steel, Finish: Electro-Galvanized.

Category: Strut Channel Washers

EMT Conduit Strap, 1-Hole, 1-1/4 Inch, Steel, For Use With EMT Conduit

Category: Steel 1-Hole Conduit Straps

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-3/32 IN, Trade Size: 1/2 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2,

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Body With Cover/Gasket, LR, 1-1/2 Inch, Aluminum

Category: Type LR Iron Conduit Bodies

Sealing Fitting, Vertical, 1 Inch, For Close Turing Radius, Female, 40% Fill, Threaded, Malleable Iron, For Rigid/IMC Conduit.

Category: Explosion-Proof Female Vertical Sealing Fittings

Eaton B-Line series conduit support fasteners, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.08lbs, Conduit size: 1", Guide-Rite conduit fasteners

Category: Conduit Hangers From Wire/Rod & Beam

OZ-Gedney BC-G Series Flat Top Design Cover, 2-1/2 - 3 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards:

Category: Iron Conduit Body Covers

OZG 4Q-100FM 1" COMB CP LFMC/

Category: Steel Rigid To Liquidtight Combination Couplings

Corner Angle, 3 Holes, Bolt Hole Diameter 9/16 in, Material: Steel, Finish: Electro-Galvanized.

Category: 90 Degree Strut Channel Corner Connectors

Replacement Gland, Cable Range: 0.312 Inch - 0.437 Inch, Material: Neoprene Grommet. For Use w/ 3/8 Inch Connector Hubs.

Category: Replacement Cable Glands

Conduit Body, Type: LR, 1-1/4 Inch, Form 8, Grayloy Iron, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

Sealing Fitting, Vertical, 2 Inch, Male/Female, 25% Fill, Malleable Iron, Removable Male Nipple, For Use With Rigid/IMC Conduit in Hazardous Locations

Category: Explosion-Proof 25% Fill Male / Female Vertical Sealing Fittings

Loop Hanger, Standard Duty, 3/4 Inch, Rod Size 3/8 Inch, Steel/Pre-Galvanized, Recommended For The Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

4" J-Hook Wide/Ret - Batwing Clip

Category: J-Hook From Wire/Rod & Beam

Zinc die-cast, liquid-tight, and oil-tight strain relief cord connector furnished with a sealing ring and locknut. Supports .750 to .875 cord range with a 1 inch trade size.

Category: Straight Die Cast Zinc Cord Grips

nVent Cat HP J-Hook with Hammer-On Flange Clip, Swivel, 2" dia, 1/8"û1/4" Flange

Category: J-Hook From Wire/Rod & Beam