Fittings

Swedge Coupling With Center Stop, 4 Inch Diameter, PVC

Category: PVC Swedge Couplings

EMT Compression Coupling, 3/4 Inch Diameter, Concrete Tight, Steel with Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Couplings

Service Entrance Cable Connector, 1-1/2", Zinc Die Cast

Category: Zinc Die Cast NM Cable Connectors

Liquidtight Connector, 2 Inch, Straight, Bullet Type, Non-Metallic, Black, For Use With Type B Liquidtight Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

EMT Compression Coupling, 1/2 Inch, Zinc Die Cast, Concrete Tight, For Use With EMT Steel/Aluminum Steel Conduit

Category: Zinc Die Cast Concrete Tight EMT Compression Couplings

EMT Compression Connector, 1-1/4 Inch Diameter, Insulated Throat, Concrete Tight, Steel/Zinc Plated, For Use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Rigid Conduit Strap, 1-Hole, Size: 1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Beam Clamp, 2-1/2", 2-1/4" High, 1/2-13 Threads, Malleable Iron, Hot Dipped Galvanized

Category: Beam Clamps - Adjustable

Thread Install Rod Hanger With Anglet Bracket, 1/4", Steel/Pregalvanized

Category: Rod & Wire Hangers

Chase Nipple, 2-1/2 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

1-1/4 Inch, Insulated Ground Bushing, Threaded, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.

Category: Threaded Ground Bushings

EMT Compression Connector, 1-1/4 Inch Diameter, Insulated, Concrete Tight, Steel With Zinc Plating, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Compression Connector, 1/2 Inch Diameter, Raintight, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Connectors

Rigid Compression Connector, 1/2 Inch, Steel, Concrete Tight, Used on Threadless Rigid Conduit, UL 514-B

Category: Steel Rigid Conduit Threadless Connectors

Liquidtight Connector, 90°, 1-1/4 Inch, Malleable Iron, Insulated, Liquidtight Flexible Metal Conduit & Type B Non-Metallic Conduit, UL 514-B, CSA C22.2

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

PVC Cement, Clear, Medium Body, Fast Set, 1 Gallon, For Use On Piping Systems For Potable Water, DWV (Drain, Waste, Vent), Electrical Conduit, Irrigation, and Sewer / Drain Applications.

Category: PVC Cement

Conduit Hanger With Bolt, Rigid: 4 Inch, Material: Steel, For Use With Rigid/IMC Conduit

Category: Conduit Clamps

Locknut, Type: Tiger Grip, Size: 3/4 Inch, Material: Steel, For Use With Rigid/IMC Conduit.

Category: Steel Conduit Locknuts

Cord Connector, Low Profile, Size: 1/2 inch, Strain Relief, Cord Range: 0.100 - 0.300 Inch, Material: Non-Metallic.

Category: Straight Low Profile Non-Metallic Cord Grips

Conduit Body Cover, Type Screw-On/Flat Cover, Form 35, Diameter 1/2 Inch, Stamped Steel, Furnished With Stainless Steel Fastening Screws

Category: Steel Conduit Body Covers

J-Hook With Rod/Wire Clip, 3/4 Inch, Accommodates 1/4 Inch Rod, #12 - 18 Wire Size, Steel With Pregalvanized Finish

Category: J-Hook From Wire/Rod & Beam

FM7 UNILETS Form-IN-Place Clip Cover With Integral Gasket, Hub Size: 2 IN, Form: 7, Mounting: Screw-In, Material: Stamped Steel, Finish: Zinc Electroplate, Enclosure: NEMA 3R, Standard: UL File Number E2527, CSA 65183, Class 4413-02, Cla

Category: Steel Conduit Body Covers With Gaskets

Category: Straight Squeeze Flex Connectors

5/16" Electro-Galvanized Flat Plate Fitting

Category: Strut Channel Nuts