Search results

For covering single receptacles - 1.59" (40mm) diameter. White

Category: 1-Gang Raceway Box Covers & Faceplates

Workstation Outlet Center™ Offset Box for Pan-Way® Snap-On Faceplates. Two-piece box and bracket accept any standard electrical outlet. Accepts any Pan-Way® Snap-On Electrical/Communication Faceplates, White.

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, Rectangular Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

Workstation Outlet Center™ Offset Box for screw-on faceplates. Two-piece box and bracket accept any NEMA standard screw-on faceplate, Off White.

Category: 1-Gang Raceway Device Brackets & Plates

Snap-on single gang rectangular electrical/communication faceplate. Used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Available in standard (KO) widths.

Category: 1-Gang Raceway Device Brackets & Plates

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

For mounting one or two keystone device modules, recessed to provide a flush installation. Has one opening and one KO. Fog White

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" d

Category: 1-Gang Raceway Device Boxes

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts fo

Category: 1-Gang Raceway Device Boxes

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts two 1/2-size PANDUIT® Mini-Com® Inserts and four modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 4-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on single gang 106 duplex communication faceplate. Used to cover one NEMA standard 106 duplex communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with one mounting scre

Category: 1-Gang Raceway Box Covers & Faceplates

Fast-Snap™ Single Gang Two-Piece Snap Together Outlet Box with adhesive backing. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or

Category: 1-Gang Raceway Device Boxes

Snap-on single gang rectangular communication faceplate. Used to cover one NEMA standard rectangular communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with two mounting sc

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 4-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece snap together power source box. For use with Pan-Way® LDPH3, 5, 10, or LDS3, or 5 profile raceway. 5.02"L x 3.32"W x 1.31"H (127.6mm x 83.0mm x 33.3mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

In-wall box adapter. Adapts single gang surface mount outlet boxes to in-wall conduit boxes.

Category: 1-Gang Raceway Device Boxes

Snap-on single gang blank cover faceplate. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece snap together outlet box with adhesive backing. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diamete

Category: 1-Gang Raceway Device Boxes