Search results

Available in standard (KO) widths.

Category: 1-Gang Raceway Device Brackets & Plates

Four-Gang Cover, Two Duplex Receptacles Installed, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Snap-on vertical sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Surface mount box for use with Eclipse Raceway or standalone application. Accepts two front-loaded downward facing Ortronics Series II inserts. White

Category: 2-Gang Raceway Device Boxes

For mounting one or two keystone device modules, recessed to provide a flush installation. Has one opening and one KO. Fog White

Category: 1-Gang Raceway Box Covers & Faceplates

Three gang, two-piece screw together deep outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard three gang faceplates. For use with Pan-Way® LD, LDPH or T-45 surface raceway systems. 7.00in L x 5.19in W x 2.75in H (177.9mm x 131.9mm

Category: 3-Gang Raceway Device Boxes

Three gang, two-piece screw together deep outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard three gang faceplates. For use with Pan-Way® LD, LDPH or T-45 surface raceway systems. 7.00in L x 5.19in W x 2.75in H (177.9mm x 131.9mm

Category: 3-Gang Raceway Device Boxes

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" d

Category: 1-Gang Raceway Device Boxes

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts fo

Category: 1-Gang Raceway Device Boxes

Double gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 2-Gang Raceway Device Boxes

Snap-on 4-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on single gang 106 duplex communication faceplate. Used to cover one NEMA standard 106 duplex communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with one mounting scre

Category: 1-Gang Raceway Box Covers & Faceplates

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts two 1/2-size PANDUIT® Mini-Com® Inserts and four modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on single gang rectangular communication faceplate. Used to cover one NEMA standard rectangular communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with two mounting sc

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on 4-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Fast-Snap™ Single Gang Two-Piece Snap Together Outlet Box with adhesive backing. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or

Category: 1-Gang Raceway Device Boxes

Double gang two-piece screw together divided outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakout

Category: 2-Gang Raceway Device Boxes

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

In-wall box adapter. Adapts single gang surface mount outlet boxes to in-wall conduit boxes.

Category: 1-Gang Raceway Device Boxes

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, International Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Fits into LD10 breakout of most Pan-Way™ Surface Mount Outlet Boxes. For use with type PD6 raceway, Electric Ivory.

Category: Round Raceway Junction Boxes