Hand Tools

Utility Knife Blades Are Engineered To Cut The Most Common Jobsite Materials, Blades Stay Sharp For Consistent, Reliable Cuts, Task After Task, Includes 10 Standard Utility Blades That Fit Most Utility Knives, Triple Ground Cutting Edge Provides A Sharp Edge That Stays Sharp, Designed And Sized To Fit Most Standard Utility Knives, Blades Can Be Reversed To Provide Two Cutting Edges For Extra Life, Heavy-Duty Steel Construction Provides Toughness That Lasts

Category: Utility Knives

9" Torpedo Level Rare Earth Magnet, V-Grooved Edge, Vials: (3), Material: Aluminum

Category: Torpedo Levels

Mini Ratchet And Multi-Bit Driver Set With A Slim Profile Ratchet (Cat. No. 65200) Stubby Handle With 2 Flip Sockets, 7 Screwdriver Bits, Impact Rated Shaft (Cat. No. 32308Hd), Ratchet With A 1/4-Inch And A 5/16-Inch Nut Driver Head And A Ring Magnet And Bit Clip For Fastener And Bit Retention, 5-In-1 Flip Socket Includes 1/4, 5/16, 3/8 And 7/16-Inch Sockets Plus A 1/4-Inch Bit Holding Feature, The 72-Tooth Ratchet Only Needs A 5-Degree Sweep For Tight Areas, Compact Driver Reaches Easily Into Tight Spots, Screwdriver Bit Sizes Include #1, #2, #3 Phillips, 3/16-Inch (5 Mm) And 1/4-Inch (6 Mm) Slotted, #1, #2 Square, Industrial-Strength Bits That Are Conveniently Housed In The Handle

Category: Multi-Bit Driver

28-Piece Socket Set Features: #1, #2 Phillips, 1/4-Inch Slotted, #2 Square, T20 Torx® , And Socket Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch And 8 To 17 Mm, Cushion-Grip™ Pass Through Screwdriver Handle Receives Knect™ (M) Sockets Or Adapters, Pass Through 90-Tooth Socket Wrench Drives Hex Nuts On Threaded Rods And Extended Bolts, Requiring Only 4 Degrees Of Swing For Use In Tight Spaces, A 20-Percent Improvement Over 72-Tooth Ratchets, Knect™ (M) Specialized Square-Drive Adapter Allows Any Square-Drive Socket To Be Used On The Pass Through Wrench, 1/4-Inch Magnetic Socket Doubles As A Standard 1/4-Inch Bit Holder, Impact-Rated Adapter Allows All Components To Be Used On A 1/4-Inch Impact Driver, Compact, Modular Storage System Is Designed To Nest Neatly Within The Klein Modbox™ System

Category: Sockets & Socket Sets

Wire Stripper, Reflex Super T®-Stripper Wire Stripper, Capacity: 8-16 AWG Solid, 10-18 AWG Stranded

Category: Combination Wire Stripper / Cutter Tools

High Leverage Lineman's Pliers New England with Fish Tape Puller & Crimper

Category: Crimping Pliers

RED POCKET LASER LEVEL

Category: Levels

High Leverage Lineman's Pliers New England with Fish Tape Puller & Crimper

Category: Crimping Pliers

Cobra® Water Pump Pliers

Category: Adjustable Pliers

15-in-1 Multi-Bit Ratcheting Screwdriver, Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #0, #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Combo Bits: #1, #2, TORX® Bits: T10, T15, T20, T25

Category: Multi-Bit Screwdrivers

5-Piece Hex-Key Set, Includes: 3/16", 7/32", 1/4", 5/16", 3/8"

Category: Hex Key Sets

Klein-Kurve® Heavy-Duty Wire Stripper 8-20 Awg K12035 Strips 8 To18 Awg Solid And 10 To 20 Awg Stranded Wire Large Knurled Plier Tip Pulls And Twists Wire Shear Cutting Knives For Easier Cutting Of Copper Wire And Larger Material Such As NM-B® Cable (All Sizes) And Other Nonmetallic (Type Nm) Sheathed Cable Screw Shearing For 6-32 And 8-32 Screws Wire Looping Hole Klein-Kurve™ Comfort Grip Handles For Reduced Hand Fatigue Hot Riveted Joint Prevents Wobble And Separation Of The Blades Over Time Textured Grips For Enhanced Dexterity And Integrated Hang Holes. NM-B® Is A Registered Trademark Of Southwire® Company

Category: Wire Strippers

Long Nose Pliers with Cutter

Category: Long Nose Pliers

Pocket Knife, Blade Length: 3-1/2", Material: Stainless Steel.

Category: 1-Blade Pocket Knives

2 Adjustable Wrenches With Dipped Handles For Extra Grip, Extra Capacity Compact Size Wrench For Jobs In Confined Spaces, Easy To Adjust Knurls For Smooth, Single-Handed Operation, Laser Sae And Metric Size Identification Markings On Both Sides Of The Wrench, Heat Treated Alloy Steel To Handle The Torque And Wear Of Demanding Jobs, Chrome Plated For Maximum Rust Resistance, Large Loop Hole In The Handle For Tethering Or Hanging On A Peg

Category: Adjustable Wrenches

Klein, MAG2, Screwdriver Magnetizer and Demagnetizer, Orange

Category: Screwdriver Magnetizers

Impact Flip Socket Set With Swivel Adapter, 6 Piece, Steel, Black

Category: Sockets & Socket Sets

Large Cable Stripper, Effectively Removes Insulation on 250 MCM - 2/0 Cable, Clover Design, Replaceable Blades and Screws (Cat. No. 21051B) Available for Extended Use

Category: Wire Strippers

9-1/2" Journeyman High-Leverage Cable Cutter, Capacity: 4/0 Aluminum, 2/0 Soft Copper, 100-pair 24 AWG Communications Wire

Category: Cable Cutters

Quick-Adjust KlawÖ Pump Pliers, 10-Inch

Category: Adjustable Pliers

Slim-Tip Insulated Screwdriver, 1/4-Inch Cabinet, 4-Inch Shank

Category: Slotted Cabinet Tip Screwdrivers

KNECT 17-IN-1 IMPACT HYBRID DRIVER

Category: Combination Screwdriver/Nutdrivers

Long Hex Bit Socket Set, SAE and Metric, 16-Piece, Chrome-Vanadium/Steel, Case Included

Category: Sockets & Socket Sets

Knife Blade; Utility; Material: High Speed Steel Edge, Bi-metal Blade; Blade Finish: Titanium Coating

Category: Utility Knives