Search results

One-Piece Carbide Hole Cutter, 3/4 Inch Size, 1/4 Inch Diameter, 3/8 Inch Shank Size

Category: Carbide Tipped Hole Saws

Hole Saw, Carbide Grit, Diameter: 5-3/8"

Category: Recessed Light Hole Saws

Hole Saw, Carbide Grit, Hole Diameter: 2-1/2", Thread: 5/8"-18, Recommended RPM: 400

Category: Carbide Tipped Hole Saws

1-1/2" Hole Dozer™ Bi-Metal Hole Saw

Category: Bi-Metal Hole Saws

Milwaukee; Hole Saw Cutter; Hole Diameter: 1-3/8 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

Milwaukee; Hole Saw; Ice Hardened; Hole Diameter: 15/16 In; Rpm Mild Steel: 370rpm; Rpm Stainless Steel: 185 Rpm; Rpm Cast Iron: 245 Rpm; Rpm Aluminum: 555 Rpm

Category: Bi-Metal Hole Saws

Milwaukee; Cutter; Hole Saw; Hole Diameter: 2-1/2 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

1-3/8 Inch One-Piece Carbide Hole Cutter, Spring Loaded Pilot Bit For Fast drilling & Clean Plug Ejection, For Use In Stainless Steel, Mild Steel, Copper, Aluminum, and Other Metal Materials

Category: Carbide Tipped Hole Saws

8PC 2" TCT Annular Cutter Kit, Includes: (1) 3/4" TCT Annular Cutter, (1) 5/8" TCT Annular Cutter, (1) 7/8" TCT Annular Cutter, (1) 9/16" TCT Annular Cutter, (1) 11/16" TCT Annular Cutter, (1) 13/16" TCT Annular Cutter, (1) 15/16" TCT Annular Cutter, (1) 1-1/16" TCT Annular Cutter, (2) Retractable Pilot Pin & (2) Retractable Pilot Pins

Category: Annular Cutters

Milwaukee; Cutter; Hole Saw; Hole Diameter: 1-3/4 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

For materials up to 3/16ö, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash« cutting fluid for best results. Hawg Wash« fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diameter. Bullets: 7/8 in. bit diameter For use with quick change arbor 49-57-0035 3/16 in. cutting depth 05547

Category: Carbide Tipped Hole Saws

Carbide Teeth For 50X Life In Extreme Materials, Longest Life In Stainless Steel, Outperforms Bi-Metal Hole Saws

Category: Carbide Grit Hole Saws

MIL 49-56-9656 HOLE DOZER HOL

Category: Bi-Metal Hole Saws

20percent Thinner Wall Construction: Faster Cutting Due To Less Material Being Removed For Same Size Hole, Duel Alternating Tooth Geometry: More Aggressive Cutting As Well As Increased Chip Ejection, Cuts Up To 15percent Faster, Proprietarysteel And 3 Ha

Category: Annular Cutters

3IN CARBIDE HOLE CUTTER

Category: Carbide Tipped Hole Saws

1-3/8" BIG HAWG Hole Saw With Carbide Teeth, Depth of Cut: 2.34”, Cuts Wood, Nails, Shingles, Cement Board, Plaster and More

Category: Carbide Tipped Hole Saws

One-Piece Carbide Hole Cutters, 1-1/4 Inch Size, 1/4 Inch Diameter, 1/8 Inch Shank Size

Category: Carbide Tipped Hole Saws

Milwaukee; Cutter; Hole Saw; Hole Diameter: 2 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

1-3/4" BIG HAWG™ Hole Saw With Carbide Teeth, Cuts Wood, Nails, Shingles, Cement Board, Plaster and More

Category: Carbide Tipped Hole Saws

1" Diamond Plus™ Hole Saw

Category: Diamond Grit Hole Saws

7/8" Hole Dozer™ Bi-Metal Hole Saw, 25 Pack

Category: Bi-Metal Hole Saws

MIL 49-56-9645 4FT HOLE DOZER

Category: Bi-Metal Hole Saws

MIL 49-56-9649 4-1/2FT HOLE

Category: Bi-Metal Hole Saws

MIL 49-56-9641 HOLE DOZER HOL

Category: Bi-Metal Hole Saws