Control & Automation

AB 889D-F4ACDE-5 889D DC MICRO CORD

Category: 4-Pin Cordsets

Sensor, Photoelectric, Background Suppression, 18 mm, 10 - 30 Volt DC, 30 mA, Selectable Light or Dark Operate, 4 Pin DC Micro Connector

Category: Normal Duty Background Rejection Photoelectric Sensors

Kinetix Low Inertia, 480 V AC, 115 mm Blt Circ, 3 Mag, 4500 RPM, Multi Turn, Keyed, IP66 Seal Fitted

Category: 480 VAC Servo Motors

I/O Module, Analog Input, 4 Channel, Voltage Current, 16 Bits, 2-3-4 Wire

Category: PLC I/O Modules

Contactor, Lighting, 30 Amp, 600 Volt AC, 120 Volt AC Coil, 8-Pole, 8 Normally Open Contacts, Electrically Held

Category: Open Lighting Contactors

Power Supply, Universal, 24 Volt DC Input, 24 Volt DC Output, 40 Watt, Can Not be on the Same Back Plane with More than 1 Power Supply

Category: PLC Logic Power Supplies

Terminal Block, 10 Amp, 600 Volt, AC/DC, 2 Circuit, Gray, 28 -16 AWG, 1.5 mm, 50 in a Package

Category: Double Deck Feed Through & Ground Terminal Blocks

Contactor, 9 Amp, AC3 Duty, 24 - 60 Volt AC/20 - 60 Volt DC Electronic Coil (Low Consumption), 1 Normally Open Contact

Category: IEC Contactors - 0-16 Amp

VPL Low Inertia Motors, 480 Volt AC, 75 mm Bolt Circle Frame Size, 3 (Three) Magnet Stack, F Winding, 4500 RPM Rated Speed, 18 bit Single-turn and 12 bit Multi-turn Digital High Resolution Encoder, Keyless Shaft, SpeedTec Right Angle DIN Connector, 325° Rotatable, 24 Volt DC, Holding Brake

Category: 480 VAC Servo Motors

45DMS Distance Measurement Sensor, Background Reflection, 0.1 - 5 meter, Push Button and Remote Touch, Class 1 Laser, Auto PNP or NPN (IO-Link) and 4 - 20 mA Output, Integral 5 pin DC Micro (M12)

Category: High Performance Laser Photoelectric Sensors

PowerFlex 755TS AC Drive, with Embedded EtherNet/IP, Standard Protection, Forced Air, AC Input with Precharge, Includes DC Terminals, Open Type, 480 Volt AC, 3-Phase, 14 Amps, 10 Horse Power Normal Duty, 7.5 Horse Power Heavy Duty, CM Jumper Installed, DB Transistor, Blank (No HIM), Frame 2

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Cable, Extension, 1 meter, 3.3 Foot, for Connecting HIM

Category: VFD Control Panel Cables

Contactor, Safety, 12 Amp, 24 Volt DC, Electronic Coil, with Diode, Contacts, 3 Normally Open, 1 Normally Open, 4 Normally Closed

Category: IEC Contactors - DC Operating

BUS SH5-320 SHAFT 320MM

Category: Disconnect Switch Shafts

VPH Servo Motor, Hygienic, 480 Volt AC, 100 mm Bolt Circle Frame Size, 3 (Three) Magnet Stacks, 4500-6600 RPM Rated Speed, Multi-turn 23 bit Sa fety Rated, Keyed Shaft, Single SpeedTec DIN connector, 24V DC Holding Brake, Standard Single Cable, 1 Meter On Motor Cable

Category: 480 VAC Servo Motors

Terminal Block, 65 Amp, 600 Volt AC/DC, Black, 10 mm, Feed Through, 50 in a Package

Category: 10mm Feed Through & Ground Terminal Blocks

30 Amp, 600 Volt, Toggle, Short Toggle, Double-Pole, AC Motor Starting Switch, Industrial Grade, Non-Grounding, Side Wired - Black.

Category: Toggle Manual Starters / Switches

Motor Starter, Manual, Push Button, 600 Volt AC, 3-5 HP, NEMA 1, Requires Thermal Overloads, 3-Phase

Category: Enclosed Manual Starters / Switches

Drive, PowerFlex 527, with Embedded Dual Port EtherNet/IP and Integrated Safety, 480 Volt AC, 3 Phase, 3 Horse Power, 2.2 kW Normal Duty; 3 Horse Power, 2.2 kW Heavy Duty, Frame A, IP20 NEMA / Open Type, Filter

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Terminal Block, Jumper, Screwless Center, 2 Pole, Yellow, for 1492-L4, L4T, L4Q, LD4DF, LD4DR, LD4SS, LD4, LD4C, L16D, 60 in a Package

Category: Terminal Block Jumper Bars

800T Trigger Action E-Stop, 2 Pos, Twist Release, 45 mm Plastic, Red, Full V w/ LED L A, 12 - 130 V

Category: 30mm Twist To Release Pushbutton Operators

Side Mounted Auxiliary Contact. 1 N.O. Used with NEMA Size 00-2 & IEC Size A-K.

Category: Starter & Contactor Auxiliary Contacts

Contactor, Definite Purpose, 30 Amp, 600 Volt AC, 277 Volt AC Coil, 3-Phase, 3-Pole, Normally Open Contacts

Category: 3-Pole Definite Purpose Contactors

Servo Motor, Low Inertia, VPL, 480 Volt AC, 130 mm Bolt Circle Frame Size, 4 (Four) Magnet Stacks, E Winding, 3300-3900 RPM Rated Speed, 18 bit Single-Turn and 12 bit Multi-Turn Digital High Resolution Encoder, Keyed Shaft, Single SpeedTec Din Connector, 24V DC Holding Brake

Category: 480 VAC Servo Motors